Couple questions on 6.7 bottom end assembly

Can anyone tell me which way a Mahle piston goes in a 6.7? One side of the underside has one hole and the other two. I’m guessing that the one hole goes over the cooling nozzle and the side with two are the drain?
Also does the long side of a Carrillo rod go to the oil cooler side or cam side? Oem says numbers are on the long side and long side to cooler but Carrillo’s have numbers only on the short side.

Thanks guys

The notch in the skirt goes over the piston oiler.

Sent from my XT1575 using Tapatalk

While I've witnessed rods that were installed backwards, and they will still run like this, the correct way is long side towards the cooler like you said.

Long side towards exhaust manifold. This reduces sheer force in the caps/bolts.

Many aftermarket rods won't clear the cam when installed backwards.

Broaner said:

Many aftermarket rods won't clear the cam when installed backwards.

Click to expand...

My Wagler Rods did not clear the cam. They definitely went in one way.