Quote:
Originally Posted by BCH
I recently purchased an Aeromotive A1000 off a member on here with intentions of doing a return type system. I'm having trouble deciding which regulator to go with. I've looked at Fuel Lab and Aeromotive regulators but would really appreciate hearing what people running this pump are actually using for their regulator. I'm installing it on a p-pump engine by the way.
|
I'm running a fuelab pump similar to an a1000 and a fuelab regulator on the return side on the injection pump. Regulator is a single line in and single line out -6 for both if I remember correctly. And I ran the regulator return all the way to the tank separate from the factory style return. This is on a p-pump 24v. If I were to do it again or get around to changing it I would put the regulator on the feed side of the injection pump