Thread: 63.5mm HE351ve
View Single Post
Old 10-24-2017, 01:54 PM   #1
Redrider2911

Name: Redrider2911
Title: Too Much Time
Status: Not Here
Join Date: Nov 2015
Location: Yakima, WA
Member`s Gallery
Posts: 742
63.5mm HE351ve

So I know this isn't the norm at all, but I am thinking of replacing the 60mm WH1C I made with an HE351ve over the top of my S475. I know the WH1C is choking the exhaust side, I have the 351 sitting here and from what I read they open up to 20cm; so I thought I might try it. The wheel is a little chewed up so I was already planning to replace it, but I was thinking why not grab a 63.5mmx88mm wheel from a Powerstroke for dirt cheap? I know their shafts are a little bigger, I have access to a good lathe here at work; so I was just going to plan on making a shrink fit aluminum bushing...
__________________
49 Willys Pickup. 5600lb. 11.8sec @115mph 1/4. 12 valve. MegaSquirted 47RH. 3.54 posi rear. 35" tires. 64mm HE351ve, S475 (75/96/1.32), A/W Intercooler. AFC mods. 5x16s. 191 DVs, 180 pump. 23*. 85psi. Build Thread
  Reply With Quote