|
Question for you guys on big water systems
Last night I gave my new to me water system a quarter mile pass and it seemed to put out the fire around the top of 2nd. Truck bucked and cut in and out. I verified this being the issue by turning the water off on the next pass and had no issues. I have the option of cutting down pressure or nozzle size. I think nozzle size would be wise but looking for some verification here.
System is the schieds stand alone kit running 650 psi. It is actuated with a Hobbs switch at 50psi. 6 nozzles feeding intake runners. Not sure of the nozzle size I bought the kit used from a puller. I benched tested about 3 quarts should be injected on a 10 second pass.
|