Rig Wrench
Wannabe Tech
Aweful cheep for flat glass...
Suspension/rear end question.
Is the 2014 Kenworth AG400L the same thing as the newer Pete Low Air?
Next question, on the tag/dummy rear ends, (with what looks like a normal housing, but with a cover on it) can you put a differential and axles in them and have a “proper” rear axle?
Its hid out in the "other" section too, whole thing is kinda weird.
Sent from my SM-G965U using Tapatalk
Yes and yes
Oops. Bridge too low
European bum upgraded from his ugly cab over!
Sent from my SM-G960U using Tapatalk
Quick question for the experts,
To replace a cm871isx in a 2011 kw t660 with a C15 cat what has to be changed electrically? Is it just a matter of repinning the harness that goes from the ecm to the firewall or is it way more involved than that?
Quick question for the experts,
To replace a cm871isx in a 2011 kw t660 with a C15 cat what has to be changed electrically? Is it just a matter of repinning the harness that goes from the ecm to the firewall or is it way more involved than that?
our 65e cat challenger developed a problem last night. Going through the field the temp gauge almost hits the red then cools way down then is back up to the red again. The coolant level is fine the thermostat and water pump maybe have 800hrs on them. It's a 3176 engine.
I would make sure it’s actually doing what the gauge says. On some of the older trucks there are 3 sensors, one for gauge, one for ecm and one for warning light and you need to believe 2 of them.
Can someone help me out with an engine serial number?
Trying to find out engine build date. Truck build date is 4/00, engine serial number is 6NZ16102.
You're not eld exempt if that's what you're trying to figure out. I can look it up on sis when I get home tomorrow if no one beats me to it though.
The first 49xx 6nz's were exempt. I'll pull it up when I get home tomorrow afternoon. Forgot my laptop at home when I was running out the door last week.