Competition Diesel.Com - Bringing The BEST Together - View Single Post

DISTURBED · 10-23-2017, 06:42 AM

Go to your local parts store and see if they have a bore scope you can rent/borrow to look down the tappet hole. If it made it to the pan a bending magnet is what I would try. Unless it is on the shallow end of the pan. May need a rubber mallet to tap the pan to get it to fall in the deep end so you can get it with the magnet

10-23-2017, 06:42 AM	#4
DISTURBED Name: DISTURBED Title: YEA WE RIDE THE SHORT BUS Status: Not Here Join Date: Nov 2007 Location: Winchester, Va Member`s Gallery Posts: 6,417	Go to your local parts store and see if they have a bore scope you can rent/borrow to look down the tappet hole. If it made it to the pan a bending magnet is what I would try. Unless it is on the shallow end of the pan. May need a rubber mallet to tap the pan to get it to fall in the deep end so you can get it with the magnet __________________ Thanks, Jeremy 01 CTD Retired sled puller, dedicated "Twin Turbo" tow rig 96 CTD "TOO" Disturbed 3.0 - Built by Disturbed Diesel Performance 96 CTD "The Sickness" 2.6/2.8- Built by Disturbed Diesel Performance Last edited by DISTURBED; 10-23-2017 at 06:46 AM.