05 3500 4x4 starting with no trans in the truck
Ok. Here's to the question I bought this truck rebuilt the motor put new injectors and all that jazz.
The motor is in all bolted in and hooked up. I have no power to the lift pump. SO I jump wired the lift pump.
It is a 48re truck. So i wired neutral safety switch just so it would crank.
When it starts the lights flash and the horn honks then dies after about 15 20 seconds. I know it's the security bs. But is that because the trans is out and the ECM isn't seeing any communication? I assume or should I check into something else.
I have started my 08 with no trans but it's also standard so that's alot different. Has anyone else ever started there 48re truck with no trans.
Thanks guys
__________________
08 3500 qcsb 6.7 6 speed manual, valair DD, all deletes efi live, arp studs&rocker studs, Vulcan hg w/orings, max spool valve springs, max spoolpush rods, SB66.
2008 megacab 4x4 dually 12v build in progress
1990 2wd d100 4bt nv5600 vailair single disk in progress
|