Quote:
Originally Posted by Justappumped24v
Also a cheap fix for the temperature issue is wiring a resistor instead of the temp gauge that way the computer sees a constant temperature and will shift the same. I believe it’s a 32ohm
|
What are you talking about? Lol the mechanical governor controls the shift point by raising governor pressure when the fluid (at whatever temp) is forced through the expanding and contracting orifice based off centrifugal force from the output shaft rpm. This is the problem. That opening will not control governor pressure consistently across temperature changes. That is one of the issues I will be fixing by eliminating the use of governor pressure period. No thermistor to manipulate here...
__________________
49 Willys Pickup. 5600lb. 11.8sec @115mph 1/4. 12 valve. MegaSquirted 47RH. 3.54 posi rear. 35" tires. 64mm HE351ve, S475 (75/96/1.32), A/W Intercooler. AFC mods. 5x16s. 191 DVs, 180 pump. 23*. 85psi. Build Thread
Last edited by Redrider2911; 12-12-2017 at 03:31 PM.
|