View Single Post
Old 06-10-2017, 09:55 AM   #1
turbo2387
 
turbo2387's Avatar

Name: turbo2387
Title: Nipple Fluffer
Status: Not Here
Join Date: Jun 2011
Location: Indiana
Member`s Gallery
Posts: 665
Towing compounds on a near stock 95

So recently i decided to build a small set of compounds that might work with a near stock truck. With little to no supporting mods. I wanted them to be a direct fit. Test subject is a very well used 95 with 257,000 on the clock. Had to do a ton of work to it to get it safely back on the road. Rebuilt the tranny. Billet single disc and some misc basic performance stuff.

Injection pump is a 160
Stock fuel system with fuel heater delete
2095 rack plug
.024 delivery valves
Stock fuel plate
3k govoner springs
Stock injectors

Turbos are
Early first gen H1c
52/60/18cm non gated
Over a
66/74/.91 non gates s300

These package extremely well. The goal with non gated was to make this kit for dummies to tune. Fuel plate only. I admit if you over fuel this be prepared for some heller boost. Initial tests with a 100 plate pegged a 60psi gauge. Was most likely in the 70+ range. The truck when purchased would make 32psi on the stock hx35. No tune change netted lotso boost and the stock fuel plate had to go in.

Stock Fuel plate in the full forward position gets one 58psi
At both pressure ratios being perfect. 2.22 @18psi on each turbo

Plate middle is 42psi
Plate full back is 28psi

As you can see with just one adjustment you can tune the hell out of this thing.
The truck pulls very strong. Plan on pulling the green truck to thunder in muncie next weekend and running both on the dyno.
Attached Images
File Type: jpg IMG_1653.jpg (337.3 KB, 0 views)
File Type: jpg IMG_1749.jpg (666.2 KB, 0 views)
File Type: jpg IMG_1721.jpg (311.2 KB, 0 views)
File Type: jpg IMG_1706.jpg (341.5 KB, 0 views)
  Reply With Quote