Forged Pistons

Smokem

Smokem

Turbler
Joined
May 10, 2006
Messages
5,565
WPA_zps4e0181bf.jpg
 
Last edited by a moderator:
• Dedicated forgings designed around the O.E. connecting rod to maximize pin contact and minimize pin bending and forging distortion.

• Wiseco’s ArmorPlating™ hardens the ring grooves and deck area of the piston.

• 1/16th ring grooves provide engine builders with many ring choices.

• Skirt coatings reduce friction, noise, and wear.
 
Now taking orders, feel free to PM me with any questions or concerns.

60153AS_zps821267fb.jpg


60153AS_Btm_zps65be69aa.jpg
 
Listed price is $1620, distributor and race program prices are available. This includes wrist pin locks but does not include wrist pins, the piston accepts stock Cummins wrist pins. Wiseco is a stocking dealer for Total Seal and Hastings, these can be provided with the order upon request.
 
The 6.7L bore can be had, it is being discussed if there is enough demand to make it a stocked part.
 
Weston, for 12v piston with 6.7 crank ,what lenght conrod should be used (stock?)?

Are they for 6.7 block or 5.9 block?
 
Connecting rods are the same length, the piston is for a 4.88"(6.7L) stroke and 4.035-4.055"(5.9L) bore.
 
You must log in or register to reply here.
Back
Top