Quote:
Originally Posted by Big Blue24
The early precision shafts had a nice dark finish, the more recent ones have the lighter colored finish. I was basing my assumption on the machining at the feed ports, the spline length, shaft diameter, etc.
The customer supplied the shaft so if a wicked 4x4 low range launch breaks a shaft, not my issue.
|
I understand, I try to steer my customers away from them now. Haven't used one in a year so that makes sense, hopefully your guy doesn't have an issue with it.
Nice write up!
__________________
Hobie
2000 QCSB, 180 pump, 6x.013's, maxspool 2.5, trans built by me, AD150, 64/80 compounds 11.51@119mph w/s468 single
|