Cflanery88
New member
what about methanol injection? And also where is the water coming from feeding the turbine housings? Maybe cooler water? Also out of curiosity what kind of water induction system are you using for your sea water intake?
OP looks like you have the 86x77 turbine. As mentioned there is an 86x80 available as well. As long as the turbine housing isn't an issue we could easily upgrade those on both ends if desired.
what about methanol injection? And also where is the water coming from feeding the turbine housings? Maybe cooler water? Also out of curiosity what kind of water induction system are you using for your sea water intake?
Really cool boat sir. Welcome to the site.
Does the boat actually derate at 1500*, or are you just backing it down on your own.
No, not too much for them. And 1400 is still ok for any engine.Do y'all think just tightening the wastegate down a little to reach a peak of 45psi would be to much for those chargers? Not familiar with hx55's, but would be quick and easy to try and maybe that extra 4psi would keep them under 1350.
More boost is not always better if it's too hot. Just test and see.
And he will lose lots of power and reliability. Might as well back of the fuel like he is doing now.Yes, normally if you are cooling with fuel the opacity of exhaust and miles per gallon become an issue for a guy who wants to run a 5hr race.
Sent from my SAMSUNG-SM-G930A using Tapatalk
Possible to find out housing on these pictures?
Size?
Housing number is usually inside the throat.
But larger exducer helps anyway. Small housing big turbine usually works well at wide rpm range.