shortbusdriver
this guy
Brand new fully loaded 12v head. Includes valves, seals, springs, retainers/locks. Purchased though Pure Diesel Power.
This head has been surfaced over .080" to unshroud the valves. Valves protrude .015" out of the head. This must be taken into account with what cam/head gasket you are running.
Stock sized valves
Surfaced
5 angle valve job
60lb valve springs on exhaust side (stock on intake)
Additional machine work between valves to unshroud them more
$800 plus shipping as is (Normally $1169 from PDP)
Cummins 6B Fully Loaded Cylinder Head | Pure Diesel Power
I can have the head o-ringed for an additional $175, or fire ring groves cut for an additional $150.
Can add my single 145lb springs for $350, or my 180lb dual springs for $400.
Willing to cut valve reliefs in your pistons also to accommodate this head for $175.
This head has been surfaced over .080" to unshroud the valves. Valves protrude .015" out of the head. This must be taken into account with what cam/head gasket you are running.
Stock sized valves
Surfaced
5 angle valve job
60lb valve springs on exhaust side (stock on intake)
Additional machine work between valves to unshroud them more
$800 plus shipping as is (Normally $1169 from PDP)
Cummins 6B Fully Loaded Cylinder Head | Pure Diesel Power
I can have the head o-ringed for an additional $175, or fire ring groves cut for an additional $150.
Can add my single 145lb springs for $350, or my 180lb dual springs for $400.
Willing to cut valve reliefs in your pistons also to accommodate this head for $175.
