View Single Post
Old 04-30-2012, 10:40 AM   #1
Toolman
 
Toolman's Avatar

Name: Toolman
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Nov 2006
Location: Southern Michigan
Member`s Gallery
Posts: 1,077
B & B Tooling Fuel Tank Sump

Here are some pics of my new fuel tank sump. I have been running one on my drag truck for a little over a year. It is different then the others that are out there. It can be mounted any where on the tank that has a smooth flat surface big enough for it. I put mine at the back of the tank so I could run as small amount of fuel as possible and it would stay full under acceleration. It holds about 18 oz. of fuel and when installed the top plate provides an edge so when braking or accelerating the fuel can't flow out of it. It can be installed without dropping the tank and comes with all the hardware include 1/2" push on fitting , pipe plug " can be used as a drain or a duel feed" , stainless steel mounting bolts . There is no gasket I have machined a bead on it that presses into the plastic tank that makes the seal around the main opening and the screw holes. If you have any questions please PM me or give me a call 269-496-9021 Bruce

Here is the link to the pics Tank Sump
__________________
04.5 Dodge ,PPE Dual Fueler, Stainless Diesel, Bullseye Power Turbo, Fass Fuel Systems, M & J Tool Converter and shafts, Smarty UDC Tuning , Isspro Gauges, Fluidampr

B&B Tooling 269-496-9021


B & B Tooling Intakes and custom machined parts.

Member of Drive by Wire Mafia
  Reply With Quote