I'm trying to use one 40mm gate. V band connections.
They will be merged together, trying to keep them separate right up to the bottom of the gate.
Trying to keep the gate less than 4" away from the pipes.
It will be vented to the atmosphere.
It will be controlled to hold from 60-80psi on the top of the piston. (With the lightest spring)
The "tube" will be as close to the pipe angle as I can make it, so the exhaust flow is pushing up on the bottom of the gates valve face.
I'm going to try to get the gate pipe coming off the corners of the up pipes for the fastest flow.
__________________
2003 Ford KingRanch F-350 4x4
793HP fuel only
12.2 @ 113.06mph
If It Ain't Broke...Fix It Until It Is!!!
|