Quote:
Originally Posted by chevota84
what's your opinion on shims vs springs for the governor?
Sent from my SM-G930V using Tapatalk
|
A spring will be much easier to put back together when adding or taking away shims when the pump is on the truck. It is a pain in the a$$ to get the spring in, a big stack of shims and the snap ring back into the pump.
I had one more shim than I could get stacked up on my pinky finger. That one shim was always falling off and getting in the way! Then add twisting around the frame rail and operating a set of tiny snap ring pliers. Makes for a lot of fun. I found it easier to pull the pump off the truck every time!
Quote:
Originally Posted by chevota84
Can mumau get those parts? I don't know any cummins shops around here I trust for old stuff
Sent from my SM-G930V using Tapatalk
|
I will have to check but, I may have a #15 button and a gasket for the cover if you'd like them.