|
DJ's channel plate has the hole that taps into the reverse pressure side of the valve body, per the directions with the channel plate, you can run it with stock programming if you leave the hole plugged.
I couldn't find a output shaft other than the stock version, it also has the input planetary made on to it.
I did just drive the truck for the first time to another scanner at a buddies shop, Matco scanner, it did complete the relearn this time. Even with the lower stall and the valve body etc, still feels just like it did before rebuild.
__________________
Quote:
Originally Posted by jfaulkner
puzzy, tune it. 
I don't own anything stock, from engines to boobies I've modded them all. Life is too short to live with mediocre chit. |
|