Competition Diesel.Com - Bringing The BEST Together - View Single Post

mathews8pt · 04-08-2015, 07:19 PM

My goal is to break 800 this year and while I wait for free time to finish some little stuff on the truck, I was wondering what kind of setups you guys are running.

I made around 725 2 years ago with a cast wheel s468 and the same fueling setup. Now I have a set of 64/71/14 and 80/96/1.32 compounds. Fueling is a 180 pump(racked on the truck), 5ks, comp cuts, and 6x13 injectors. I'm wondering if I will need more injector to be over 800 this year? Thoughts?

P-pumped 24v setups only please.

Edit: truck has a older maxspool cam and I ported a good bit on the bowls and exhaust side of the head also.

Sent from my iPhone using Tapatalk

04-08-2015, 07:19 PM	#1
mathews8pt Name: mathews8pt Title: Too Much Time Status: Not Here Join Date: May 2009 Location: central ohio Member`s Gallery Posts: 2,269	800hp 24v setups My goal is to break 800 this year and while I wait for free time to finish some little stuff on the truck, I was wondering what kind of setups you guys are running. I made around 725 2 years ago with a cast wheel s468 and the same fueling setup. Now I have a set of 64/71/14 and 80/96/1.32 compounds. Fueling is a 180 pump(racked on the truck), 5ks, comp cuts, and 6x13 injectors. I'm wondering if I will need more injector to be over 800 this year? Thoughts? P-pumped 24v setups only please. Edit: truck has a older maxspool cam and I ported a good bit on the bowls and exhaust side of the head also. Sent from my iPhone using Tapatalk __________________ Hobie 2000 QCSB, 180 pump, 6x.013's, maxspool 2.5, trans built by me, AD150, 64/80 compounds 11.51@119mph w/s468 single Last edited by mathews8pt; 04-08-2015 at 07:21 PM.