View Single Post
Old 05-16-2017, 12:30 PM   #19
JNewman92
 
JNewman92's Avatar

Name: JNewman92
Title: Its Only $$$$$
Status: Not Here
Join Date: Dec 2013
Location: Kentucky
Member`s Gallery
Posts: 126
Had the adapter plate for the transmission polished by a local guy cause I didn't want to over do it on the color, turned out beautiful! Converter from DPC arrived just in time to install everything. Converter is a triple disc , 2600 stall. During install I found out that the 2nd gen adapter plate pushed everything back roughly an inch which caused my factory transmission mount bracket to not line up with the transmission. With help, all that was needed was cutting and extending the adjustment slots for the bracket on the crossmember back further an everything went right in. Also installed a goerend deep pan. Passenger side output 241 is installed. For transmission coolers, I chose to run two B&M supercoolers with fans.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.
Click the image to open in full size.

Sent from my SAMSUNG-SM-G930A using Tapatalk
__________________
92 Dodge with big plans

Last edited by JNewman92; 05-16-2017 at 12:31 PM.
  Reply With Quote