|
I have done one truck with a i believe a 3/4 spacer with a Kenney's 4 disc 12 stand, would have to go back and measure. It has a nv4500 bell with a scs reverser on it. It's a pretty sweet setup needed no modification.
Then another with a 1/2" spacer and a browel bell with kenny's small 4 disc and the bell itself needed some work to get the fork to sit far enough back. Nothing terrible just wasn't a drop in. The nv4500 I used already had a longer input from a old 3 South bend clutch and that part worked out nicely.
Several ways to do it. Valiar has GREAT products, not trying to take anything away from them but a 12stand clutch is the only way to go. I tell guys now if you need to save some money id do it somewhere else. Buy the best clutch they make and skimp on something else. We had over 150 hooks at 1500hp before it needed adjusting, and then adjusting is a breeze.
|