jmar
Pulling Products
I started building this for a 3.0 truck and ran out of money so I am selling it complete or parts off of it
extended cab long bed,
truck came from texas so no rust
20-145 rear axle, with 6.14 ratio and aluminum pig, saves 40 lbs,
Rockwell 106 steering axle, 6.14 ratio with a locker, it still needs larger outer axles put in and brakes and steering finished
I spent a lot of time on narrowing the frame, it should be narrow enough that the duals will stay inside the fender
it will need a passenger fender to make the body complete
Will be sold in pieces or complete, if you would like it finished for a drop in engine I can finish it also
I would hate to see it not be put to good use but if anyone is interested pm me
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-1.jpg.html"]image-1.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image.jpg.html"]image.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-7.jpg.html"]image-7.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-6.jpg.html"]image-6.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-5.jpg.html"]image-5.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-4.jpg.html"]image-4.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-3.jpg.html"]image-3.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-2.jpg.html"]image-2.jpg Photo by 4488544 | Photobucket[/ame]
extended cab long bed,
truck came from texas so no rust
20-145 rear axle, with 6.14 ratio and aluminum pig, saves 40 lbs,
Rockwell 106 steering axle, 6.14 ratio with a locker, it still needs larger outer axles put in and brakes and steering finished
I spent a lot of time on narrowing the frame, it should be narrow enough that the duals will stay inside the fender
it will need a passenger fender to make the body complete
Will be sold in pieces or complete, if you would like it finished for a drop in engine I can finish it also
I would hate to see it not be put to good use but if anyone is interested pm me
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-1.jpg.html"]image-1.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image.jpg.html"]image.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-7.jpg.html"]image-7.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-6.jpg.html"]image-6.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-5.jpg.html"]image-5.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-4.jpg.html"]image-4.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-3.jpg.html"]image-3.jpg Photo by 4488544 | Photobucket[/ame]
[ame="http://s199.photobucket.com/user/4488544/media/Mobile%20Uploads/image-2.jpg.html"]image-2.jpg Photo by 4488544 | Photobucket[/ame]