I made a mount and cross member that bolts to where the 3 bolts where the ac compressor bracket mounted. Has the same 3 on the driver side. I used a piece of 3/8 aluminum plate and i took the stock backing plate and had it machined down the exact thickness of the plate. I sandwich the plate between the bell housing and backing plate. I welded angle iron to the frame to bolt the plate to.
__________________
Thanks, Jeremy
01 CTD Retired sled puller, dedicated "Twin Turbo" tow rig
96 CTD "TOO" Disturbed 3.0 - Built by Disturbed Diesel Performance
96 CTD "The Sickness" 2.6/2.8- Built by Disturbed Diesel Performance
|