Quote:
Originally Posted by blackmega3500
What lights/ codes?
|
It’s got the anti theft, water in fuel and abs lights on but no codes or check engine light.
Anti theft pretty sure was just the tuner turning the skim off to make sure we got it running.
Water in fuel I don’t know might have just been overlooked on things needing turned off.
ABS I’ve been chasing wires with the service manual to make sure when I gutted the harnesses I didn’t switch a wire in a plug somewhere. Could also be from me welding a truss on the rear axle. Heat may have messed with the sensor. Though I do still have a speedo.
The map sensor also show 5psi of boost just sitting not running. Swapped sensors from a known good truck and the same. So not sure of that either.
Just a bunch of pain in the behind gremlins to chase down.
__________________
07.5 MCSB, Thuren/Carli/King, 35" Toyos MT's, 17" Methods, Miller’s Machine Shop 6.4 w/ Wagler long rods, QSB pistons, 188/220 cam, Ported/big valve head, Muldoons Phat shaft 48re w/ anteater, DDP 5.9 fuel, Firepunk 66/85, Firepunk EFI
Last edited by BlackasCoal; 07-11-2018 at 03:29 PM.
|