Quote:
Originally Posted by RockinRam96
So I was wrong it is my left turn signal that does not work. Anyway...
When the right turn is on I hear the clicking under the fuse box under the hood. Left turn I hear nothing. How do I get to these relays? Do I have to pull the box and split it in half?
Sent from my iPhone using Tapatalk
|
Yes. You have to pull the PDM from the truck. You have to remove all the fuses, relays and FCM mounted on the side. Then you have to drill the 3 weld points inside the box and separate the components like I had pictured above. You have to be really careful and patient. It is easy to break. Then you have to desolder the 3 relays and replace them with the 30 amp Zetter relays. I don't have the part numbers anymore but there are a lot of articles and videos on this subject that will give them.
Sent from my iPhone using Tapatalk