|
Check the voltage at the solenoid.. ( at the back of the tractor its above the PTO housing on the right.. should be just above a small valve housing that says something like PTO Clutch... (been a while..) You want to check the voltage to this solenoid when you turn on the PTO.. You have to check the voltage without breaking the circuit.. (basically don't try to check the voltage with it unpluged.) Use a paper clip or something to slide down the back side of the connector.. Put one lead of your meter on one wire.. the other on the other wire..
With the way the light is acting.. I'd guess that the electrical side of the circuit is working, but the valve is stuck.. or that there is an hydraulic or mechanical problem...
Did it just stop working on day.. or came out.. and it didn't work??
Bryan
|