Interesting side note, just torqued the head down. Specs are 80ft lbs then plus 180 degrees if it’s a medium length bolt (different lengths get different degrees). After running them, I set my torque wrench to 150ft lb, and the bolt I tested didn’t even budge.
I’m not a big guy, I had to have a 3ft cheater pipe to get them torqued. That’s a lot of torque on a 1/2” bolt
__________________
’82 300D benz Bosch MW turned up, HX30, W/A Intercooler
MF Super 90 various odds and ends done. Farm stocker
MF 98 3-71 screaming jimmy. Needs N90's. Another farm stock
'14 Ram Anarchy EFI, G56
|