79_chevy_K_30_5
New member
- Joined
- Aug 5, 2009
- Messages
- 31
hey guys i need some help here i have a 97 3/4 12v auto 2x4 and i just bought a 97 3/4 4x4 with a v-10 auto i am wanting to put the cummins in the 4x4 truck i want all the gauges to work and make it like it came that way
things i know i need to change both trucks are complete and running
i was told the wiring should be plug and play wiring under the hood
change fuel sending units and lines
change out the brake booster setup
change comp.
exh.
i wanna try to keep the gas dash for the reason of the higher tach. for 4k spring kit
i know the motor mount and inercooler is all a given i am no dummy or the know how this is suppose to go. but what do i need to do with the torque converter and tranny to make it work thanks for all your help guys i going to need everones $.02 :thankyou2:
things i know i need to change both trucks are complete and running
i was told the wiring should be plug and play wiring under the hood
change fuel sending units and lines
change out the brake booster setup
change comp.
exh.
i wanna try to keep the gas dash for the reason of the higher tach. for 4k spring kit
i know the motor mount and inercooler is all a given i am no dummy or the know how this is suppose to go. but what do i need to do with the torque converter and tranny to make it work thanks for all your help guys i going to need everones $.02 :thankyou2: