Truckers, lets see your rigs! - Page 1045 - Competition Diesel.Com

jfaulkner · 04-11-2021, 07:24 PM

Quote:

Originally Posted by Ram12vcummins

Dirty trucks look much cleaner in the rain lol

Too much securement. Need to farmer that up with either none or just some old sun bleached ratchet straps from TSC.

Ram12vcummins · 04-11-2021, 07:41 PM

Quote:

Originally Posted by jfaulkner

Too much securement. Need to farmer that up with either none or just some old sun bleached ratchet straps from TSC.

Should have lost a few axles to shorten it up too. If I’m gonna pretend to be a farmer, might as well pretend like weight regulations don’t exist.

regcanfan · 04-13-2021, 08:20 AM

Quote:

Originally Posted by jfaulkner

171702 is direct replacement and an ecm flash can embarrass a stock C15. Would need ESN to make sure injectors are the same. Most I’ve messed with were 430hp to start.

ESN is a 2ks77705

jfaulkner · 04-13-2021, 11:53 AM

Quote:

Originally Posted by regcanfan

ESN is a 2ks77705

Yep, same injectors as the higher hp versions. Easily add 100~150hp with a good turbo.

jfaulkner · 04-14-2021, 09:23 PM

Whoops.

Signature600 · 04-15-2021, 07:12 AM

What did you do that for?

Chris

jfaulkner · 04-15-2021, 07:16 AM

Quote:

Originally Posted by Signature600

What did you do that for?

Chris

Wanted to see what the inside looked like.

Signature600 · 04-15-2021, 07:53 AM

Quote:

Originally Posted by jfaulkner

Wanted to see what the inside looked like.

You can look up exploded views in books a LOT cheaper than making your own cutaway!
Chris

dieselbeef · 04-15-2021, 09:30 AM

Quote:

Originally Posted by jfaulkner

Whoops.

forgot the oil? cuz it dont look like much leaked outta that hole..or kept that brg from disintegrating

jfaulkner · 04-15-2021, 01:19 PM

Quote:

Originally Posted by dieselbeef

forgot the oil? cuz it dont look like much leaked outta that hole..or kept that brg from disintegrating

No she was full, it’s just all over everything behind it. Direct/overdrive shift clutch broke and got wedged between 2 gears. Did it when the splitter was flipped idling in my driveway.

Truck was just serviced so I know it was full.

Even left a snail trail to drop the trailer.

biggy238 · 04-16-2021, 09:31 AM

Where do you get your transmissions, or do you build your own from parts?

Sent from my motorola one 5G using Tapatalk

biggy238 · 04-16-2021, 09:35 AM

I had to lol at Greg A (alba-umbrella) for taking his Pete to TN to get an 18spd installed. There are only about 10 vendors here in Bowling Green with 20 vendor options on transmission.

I suppose that isn't really the point of what he did though....

Sent from my motorola one 5G using Tapatalk

*Snedge* · 04-16-2021, 11:23 AM

Quote:

Originally Posted by Signature600

You can look up exploded views in books a LOT cheaper than making your own cutaway!
Chris

....but you can't get the smell of compressed iron, and burned gear oil from a book.

Signature600 · 04-16-2021, 11:30 AM

Quote:

Originally Posted by Snedge

....but you can't get the smell of compressed iron, and burned gear oil from a book.

You have never seen my books. They all have oily fingerprints in them and you can barely read them anymore.

Chris

jfaulkner · 04-16-2021, 01:46 PM

Quote:

Originally Posted by biggy238

Where do you get your transmissions, or do you build your own from parts?

Sent from my motorola one 5G using Tapatalk

Eaton reman or Eaton new. Won’t touch a Weller for any price. The last two I got one had a bent main shaft and another was stuck between gears.

biggy238 · 04-16-2021, 05:40 PM

Thoughts on alliance or mascot, trc?
What kind of price are you getting on the eatons?

Sent from my motorola one 5G using Tapatalk

jfaulkner · 04-16-2021, 08:34 PM

Quote:

Originally Posted by biggy238

Thoughts on alliance or mascot, trc?
What kind of price are you getting on the eatons?

Sent from my motorola one 5G using Tapatalk

Really don’t trust any of them, believe they all just replace what’s obviously bad. I only buy Eaton because I’ve actually had one warrantied through them. Everyone else plays the dart board of excuses to deny them. “Shock load” is the usual go-to.

Powertrain 18918B was like $3700, Eaton was $4700ish, 20918B was $5000 from Eaton and new 20918B is just over $9k no core.

$300 more for a coating or treatment on the front 3 gears in the main box to make it a 20 series. ONLY difference between the 18,20,22 is the 18 series have no treatment, 20 series has the front 3 done and 22 series has all of them done (and a 14 spline Input thats pointless that makes finding a clutch harder. Seen plenty of broken input shafts, never seen one with the splines stripped off.) They all have the same gears, same shafts, same bearings same case.

Quote from Eaton rep “Eaton makes a lot of different tags but we don’t make a lot of different transmissions”. They will make minor changes like a bearing design or shift clutch but it has zero to do with torque rating.

So for anyone reading this that has a dealer tell them they can’t turn their truck up because they only have an 1800ft lb driveline they are straight blowing smoke up your ass, it’s the same shit, different tag.

SmokinCAT · 04-17-2021, 08:18 PM

I’m surprised my 12513 hasn’t spit something out of it.

SmokinCAT · 04-24-2021, 08:20 PM

Maybe one day I will get the parts for the exhaust then I can get this bed off.

RockinRam96 · 05-03-2021, 11:19 AM

Quote:

Originally Posted by SmokinCAT

Maybe one day I will get the parts for the exhaust then I can get this bed off.

What are your plans with this one? Or did I miss that?

04-15-2021, 07:12 AM	#20886
Signature600 Name: Signature600 Title: THA MAN! Status: Not Here Join Date: Aug 2006 Location: Jeffersonville, Ohio Member`s Gallery Posts: 11,974	What did you do that for? Chris __________________ THANKS TO: Tim Barber @ TRE Diesel Jeff Mumau @ Mumau Diesel Service Rip @ Source Automotive Don Thuren @ ThurenFab Suspension Columbus Diesel Supply

04-16-2021, 09:31 AM	#20891
biggy238 Name: biggy238 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Just North of Wrong Member`s Gallery Posts: 10,859	Where do you get your transmissions, or do you build your own from parts? Sent from my motorola one 5G using Tapatalk __________________ Check out @bdmaximusworx 05.5 Campanella White TDi Jetta 5spd 45.5MPG -Little Sexy '10 Silver F250 CCLB 4X4 6.4L cummins Swapped Insta @trash.panda250

04-16-2021, 09:35 AM	#20892
biggy238 Name: biggy238 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Just North of Wrong Member`s Gallery Posts: 10,859	I had to lol at Greg A (alba-umbrella) for taking his Pete to TN to get an 18spd installed. There are only about 10 vendors here in Bowling Green with 20 vendor options on transmission. I suppose that isn't really the point of what he did though.... Sent from my motorola one 5G using Tapatalk __________________ Check out @bdmaximusworx 05.5 Campanella White TDi Jetta 5spd 45.5MPG -Little Sexy '10 Silver F250 CCLB 4X4 6.4L cummins Swapped Insta @trash.panda250

04-16-2021, 05:40 PM	#20896
biggy238 Name: biggy238 Title: Too Much Time Status: Not Here Join Date: Aug 2008 Location: Just North of Wrong Member`s Gallery Posts: 10,859	Thoughts on alliance or mascot, trc? What kind of price are you getting on the eatons? Sent from my motorola one 5G using Tapatalk __________________ Check out @bdmaximusworx 05.5 Campanella White TDi Jetta 5spd 45.5MPG -Little Sexy '10 Silver F250 CCLB 4X4 6.4L cummins Swapped Insta @trash.panda250

04-17-2021, 08:18 PM	#20898
SmokinCAT Name: SmokinCAT Title: Cheap and Easy. Status: Not Here Join Date: Sep 2008 Location: Hillsboro, Oh Member`s Gallery Posts: 3,162	I’m surprised my 12513 hasn’t spit something out of it.

04-24-2021, 08:20 PM	#20899
SmokinCAT Name: SmokinCAT Title: Cheap and Easy. Status: Not Here Join Date: Sep 2008 Location: Hillsboro, Oh Member`s Gallery Posts: 3,162	Maybe one day I will get the parts for the exhaust then I can get this bed off.