4th Gen FloPro - Competition Diesel.Com

WILD_PHIL · 02-17-2018, 01:02 AM

I’ve been looking around for dlete parts and have noticed that it looks like you can’t get a flopro with bungs? Is this correct. Any idea if another company offers a TBE 5” with bungs?

Sent from my iPhone using Tapatalk Pro

RandomHero · 02-25-2018, 09:27 AM

If you're going to delete it, why would you want to keep the sensors?

WILD_PHIL · 02-25-2018, 09:38 AM

Well I liked the bungs just so there was a place to put the sensors. Seemed like a better option than zip tying them to the frame. I’ve looked at most the exhaust companies and no one offers bungs anyhow.

Sent from my iPhone using Tapatalk Pro

RandomHero · 02-25-2018, 09:41 AM

Just disconnect them at the connector and leave the sensors in the factory pipe.

WILD_PHIL · 02-25-2018, 09:42 AM

Thanks for the advice. Makes sense.

Sent from my iPhone using Tapatalk Pro

RandomHero · 02-25-2018, 10:08 AM

If you end up with Flo Pro, I highly doubt you'll be disappointed. I installed a 5in TBE system on a 14 with coil spring rear and everything fit perfectly. They spent a lot of time making sure that everything fit nicely.

mfsuper90 · 02-25-2018, 10:33 AM

I have a stainless steel AFE 5” and I thought stuffing a 5” in there would be a pain,but it was actually pretty easy and a nice clean install.

dummins · 02-25-2018, 12:13 PM

You can buy dummy plugs for the wiring to keep them from getting full of crap.

WILD_PHIL · 02-25-2018, 02:00 PM

Quote:

Originally Posted by dummins

You can buy dummy plugs for the wiring to keep them from getting full of crap.

Wouldn’t happen to have a link for that would you? A few hours ago I was just wondering if I’d be able to find that. When these 5th gens roll out, if everything will swap I may return this truck to stock and trade it in.

Sent from my iPhone using Tapatalk Pro

dummins · 02-25-2018, 02:25 PM

Store | Double R Diesel

dummins · 02-25-2018, 02:26 PM

Just search plug in there store.

WILD_PHIL · 02-25-2018, 03:11 PM

Quote:

Originally Posted by dummins

Store | Double R Diesel

Thanks

Sent from my iPhone using Tapatalk Pro

02-17-2018, 01:02 AM	#1
WILD_PHIL Name: WILD_PHIL Title: Too Much Time Status: Not Here Join Date: Nov 2009 Location: Texas Member`s Gallery Posts: 560	4th Gen FloPro I’ve been looking around for dlete parts and have noticed that it looks like you can’t get a flopro with bungs? Is this correct. Any idea if another company offers a TBE 5” with bungs? Sent from my iPhone using Tapatalk Pro __________________ Gather 2016 6.7 info before my purhase.

02-25-2018, 09:27 AM	#2
RandomHero Name: RandomHero Title: Unstoppable Diesel Status: Not Here Join Date: Apr 2015 Member`s Gallery Posts: 107	If you're going to delete it, why would you want to keep the sensors? __________________ '04.5 QCSB, 6.4L, Billet 48re, Steed Speed, BW S369/S488, Wagler, Dynomite Diesel Products, PTP, PPE, Fass, ARP, Fleece, Synergy, HP Tuners by Silver Bullet Tuning

02-25-2018, 09:38 AM	#3
WILD_PHIL Name: WILD_PHIL Title: Too Much Time Status: Not Here Join Date: Nov 2009 Location: Texas Member`s Gallery Posts: 560	Well I liked the bungs just so there was a place to put the sensors. Seemed like a better option than zip tying them to the frame. I’ve looked at most the exhaust companies and no one offers bungs anyhow. Sent from my iPhone using Tapatalk Pro __________________ Gather 2016 6.7 info before my purhase.

02-25-2018, 09:41 AM	#4
RandomHero Name: RandomHero Title: Unstoppable Diesel Status: Not Here Join Date: Apr 2015 Member`s Gallery Posts: 107	Just disconnect them at the connector and leave the sensors in the factory pipe. __________________ '04.5 QCSB, 6.4L, Billet 48re, Steed Speed, BW S369/S488, Wagler, Dynomite Diesel Products, PTP, PPE, Fass, ARP, Fleece, Synergy, HP Tuners by Silver Bullet Tuning

02-25-2018, 09:42 AM	#5
WILD_PHIL Name: WILD_PHIL Title: Too Much Time Status: Not Here Join Date: Nov 2009 Location: Texas Member`s Gallery Posts: 560	Thanks for the advice. Makes sense. Sent from my iPhone using Tapatalk Pro __________________ Gather 2016 6.7 info before my purhase.

02-25-2018, 10:08 AM	#6
RandomHero Name: RandomHero Title: Unstoppable Diesel Status: Not Here Join Date: Apr 2015 Member`s Gallery Posts: 107	If you end up with Flo Pro, I highly doubt you'll be disappointed. I installed a 5in TBE system on a 14 with coil spring rear and everything fit perfectly. They spent a lot of time making sure that everything fit nicely. __________________ '04.5 QCSB, 6.4L, Billet 48re, Steed Speed, BW S369/S488, Wagler, Dynomite Diesel Products, PTP, PPE, Fass, ARP, Fleece, Synergy, HP Tuners by Silver Bullet Tuning

02-25-2018, 10:33 AM	#7
mfsuper90 Name: mfsuper90 Title: 300ft is all I need Status: Not Here Join Date: Feb 2013 Location: Southeast ohio Member`s Gallery Posts: 769	I have a stainless steel AFE 5” and I thought stuffing a 5” in there would be a pain,but it was actually pretty easy and a nice clean install. __________________ ’82 300D benz Bosch MW turned up, HX30, W/A Intercooler MF Super 90 various odds and ends done. Farm stocker MF 98 3-71 screaming jimmy. Needs N90's. Another farm stock '14 Ram Anarchy EFI, G56

02-25-2018, 12:13 PM	#8
dummins Name: dummins Title: Another moron Status: Not Here Join Date: Jan 2012 Location: Beaver Lake Member`s Gallery Posts: 262	You can buy dummy plugs for the wiring to keep them from getting full of crap.

02-25-2018, 02:25 PM	#10
dummins Name: dummins Title: Another moron Status: Not Here Join Date: Jan 2012 Location: Beaver Lake Member`s Gallery Posts: 262	Store \| Double R Diesel

02-25-2018, 02:26 PM	#11
dummins Name: dummins Title: Another moron Status: Not Here Join Date: Jan 2012 Location: Beaver Lake Member`s Gallery Posts: 262	Just search plug in there store.