Guys, I'm sorry to be blowing up this section of the forums. With my industrial motors (out of a bus) I'm looking to replace these two items for saftey as they are cheap. However I can find any specs on the dodge motors. The part numbers are different. The spring for the regulator and the bypass are different (part number wise)
My motor states 65psi relief. If this was the case with dodge motors then I would think, we would see less of the "my oil pressure is high" as it would start to dump to oil pan after 65psi.
My motor states 65psi relief. If this was the case with dodge motors then I would think, we would see less of the "my oil pressure is high" as it would start to dump to oil pan after 65psi.