aluminum Car hauler
- Thread starter not enoughsmoke
- Start date
not enoughsmoke
floatin in tha gulf
That looks awesome!!!
Just something to think about for the long term, galvanic corrosion:
I already Prevented for that everywhere Steel and aluminum Have contact There is a Thick layer of paint as well as HDPE between bolts washers and Framing Some pics you can see it most you cant
HDPE High Density Polyethylene Sheet - Flexible - .030 x By The Foot | eBay
if you look at the right rear you can see the layer of HDPE
Last edited:
not enoughsmoke
floatin in tha gulf
After looking at other aluminum Trailers Design this will not be a problem
Mine is Way overkill Compare to the ones you buy From like EBY
Imagine having 30"+ of axle on each side of the frame that is base in the center. that narrowed you would bend the axles very easily
CorneliusRox
Seasoned Rookie
I already Prevented for that everywhere Steel and aluminum Have contact There is a Thick layer of paint as well as HDPE between bolts washers and Framing Some pics you can see it most you cant
HDPE High Density Polyethylene Sheet - Flexible - .030 x By The Foot | eBay
if you look at the right rear you can see the layer of HDPE
[
Awesome! That thing is going to last a lifetime!
DieselWrencher
6cyl Vette
Very nice trailer build! I feel your pain on the 16" wheels, but at least you can still get heavy ply 16" that don't kill the wallet when you have to buy them. Haha
not enoughsmoke
floatin in tha gulf
yep that is very true
oilburner97
New member
Sweet. Bolt everything and you'll be fine.
not enoughsmoke
floatin in tha gulf
So i got the Taillights installed not wired up yet. Got a Small toolbox for straps and jack in and finished up the jack so it can be removed once hooked to the trailer
not enoughsmoke
floatin in tha gulf
Thanks Dale its a lil crooked but i will fix that
not enoughsmoke
floatin in tha gulf
Lil more of a update
The drivers side was a lil tight on the wheel to frame that i didn't like so i made to 5 mm wheel spacers out of old rotors
[
The drivers side was a lil tight on the wheel to frame that i didn't like so i made to 5 mm wheel spacers out of old rotors
not enoughsmoke
floatin in tha gulf
not enoughsmoke
floatin in tha gulf
not enoughsmoke
floatin in tha gulf
not enoughsmoke
floatin in tha gulf
not enoughsmoke
floatin in tha gulf
well it weighs 2600lbs
CorneliusRox
Seasoned Rookie
Dang, 2600! How big are the axles again? Is that made from a trailer that's made for maxing out GCWR on a tractor?