metchosin joe
New member
So I’ve read just about every thread on this swap. Since photobucket destroyed most decent threads I’m hoping some of those that have done the He351ve setup could post how they got the exhaust brake to work.
I’ll be doing a double acting cylinder with boost and drive pressure to control the veins. That part looks pretty straight forward but getting the exhaust brake mode to work looks more complicated.
I have an air tank so I could do a compressed air or is there a simpler setup?
I’ve read some guys just run with the veins closed all the time and just the drive pressure open them..
CompD Mobile Device
I’ll be doing a double acting cylinder with boost and drive pressure to control the veins. That part looks pretty straight forward but getting the exhaust brake mode to work looks more complicated.
I have an air tank so I could do a compressed air or is there a simpler setup?
I’ve read some guys just run with the veins closed all the time and just the drive pressure open them..
CompD Mobile Device