2005 2500 auto not starting.

B

blue2002

New member
We have replaced the injectors. It's getting fuel to them. It's just not starting. Not even if you out a soaked gas rag on the intake. Won't even tray to start.


It also makes like a sucking south. It pushed mat hand away from it torbo.
 
Blue2002, turn the key on and listen for the lift pump to run, once it stops, momentarily bump the starter, the pump should start back up and run for a time, after it quits, try to start the truck.
You may need to repeat the process outlined above a couple of times.

Also, check that you have the rockers adjusted correctly, since it's been all apart.

jasonc said:
What is it about the south sucks?
Click to expand...
Do you really need it spelled out for you? :D

Mark.
 
Last edited:
blue2002 said:
CorneliusRox said:
Did you check if you're getting spark?
Click to expand...
One zapped mat hand when I tried grounding to the torbo, so I think Im good
Click to expand...

Plug gap plays a larger role than you'd think. You want a large gap, but that requires more current that your system might not have on hand, and you run the risk of 'putting out the flame'. I'd start around 0.028" and see how they do there.

[ame="http://www.youtube.com/watch?v=IuW3svdqKZM"]How to Gap a Spark Plug - YouTube[/ame]
 
You must log in or register to reply here.
Back
Top