Looking for the stepped pressure plate for the forward drum - 47re - Competition Diesel.Com

SCHMITTY · 02-06-2018, 07:12 PM

Rebuilding a trans for a neighbor kid. Forward clutches chewed up the pressure plate. Thanks- mike

SCHMITTY · 02-08-2018, 12:37 PM

Bump

SPEEDSHIFT · 02-08-2018, 12:45 PM

Heres one off ebay, you may be able to get them from your local transmission part shop as well. I use Transtar down here.

https://www.ebay.com/itm/A618-OVERDR...-/281880472737

QMFB · 02-08-2018, 02:04 PM

Why not just have it machined down, and add another clutch to make up the difference ?

SCHMITTY · 02-08-2018, 02:40 PM

I was looking for the beveled pressure plate for the forward clutch pack. It touches the bellville spring . Backside of the input shaft. I found one for 13$ at tran parts online .com

On the plate linked above I just buy a 48re plate and toss the waved snap ring that sits under the overdrive brake pack. I toss the waved one anyways and double up the top steel.

02-06-2018, 07:12 PM	#1
SCHMITTY Name: SCHMITTY Title: Not enough time Status: Not Here Join Date: Jun 2012 Location: K beach, AK Member`s Gallery Posts: 1,183	Looking for the stepped pressure plate for the forward drum - 47re Rebuilding a trans for a neighbor kid. Forward clutches chewed up the pressure plate. Thanks- mike __________________ stock 94

02-08-2018, 12:37 PM	#2
SCHMITTY Name: SCHMITTY Title: Not enough time Status: Not Here Join Date: Jun 2012 Location: K beach, AK Member`s Gallery Posts: 1,183	Bump __________________ stock 94

02-08-2018, 12:45 PM	#3
SPEEDSHIFT Name: SPEEDSHIFT Title: Too Much Time Status: Not Here Join Date: Jan 2007 Location: San Antonio, TX Member`s Gallery Posts: 5,978	Heres one off ebay, you may be able to get them from your local transmission part shop as well. I use Transtar down here. https://www.ebay.com/itm/A618-OVERDR...-/281880472737 __________________ @bodie_armstrong 2003 2500 4x4 auto FOR SALE 2005 2500 4x4 auto Drag Truck 2013 3500 4x4 Aisin Dually Tow Rig Tenacity Tuning, Longs Machine Shop, BD Diesel Performance

02-08-2018, 02:04 PM	#4
QMFB Name: QMFB Title: Fastest Welder in Texas Status: Not Here Join Date: Apr 2016 Location: Corpus Christi, TX. Member`s Gallery Posts: 1,061	Why not just have it machined down, and add another clutch to make up the difference ? __________________ 04 CCLB DRW - 6.4 Cummins, HPTuners, 80% S&S, 10mm S&S CP3, AD165, s464 /s475, full billet 48re, Arp's EVERYWHERE, mild head work, lots of time and money... And never done.

02-08-2018, 02:40 PM	#5
SCHMITTY Name: SCHMITTY Title: Not enough time Status: Not Here Join Date: Jun 2012 Location: K beach, AK Member`s Gallery Posts: 1,183	I was looking for the beveled pressure plate for the forward clutch pack. It touches the bellville spring . Backside of the input shaft. I found one for 13$ at tran parts online .com On the plate linked above I just buy a 48re plate and toss the waved snap ring that sits under the overdrive brake pack. I toss the waved one anyways and double up the top steel. __________________ stock 94 Last edited by SCHMITTY; 02-08-2018 at 02:40 PM. Reason: Spelling