DT466 Injection Pump removal

Got a 95 international with a dt466 it has the inline injection pump and I need to remove it to get it rebuilt. Is there a timing pin or some other reference before I pull it off.

Thank, Cody

i would think you find t.d.c. and pull it off.then time it when you install it?

The pumps that I messed with had the same timing pin as any other bosch pump.

There's an extra hole in the timing gear. You put a 1/4" drive extension, or bolt in it, and bar the engine over until it falls in the pinned spot, which should be where the hole faces up towards the top of the pump. In this pic, it's at the bottom, right after I took off the cover. It'll pin in around where that top bolt is.