Looking for a high pressure spin-on fuel filter

Anyone know where I can find specs for the max pressure ratings of these common spin-on filters, or even just a part number of something around 30 micron that will take 50psi or so safely?
Ive been told some of tha cat filters will work but I cant find any specs on them
I had a fuel leak on the pressure side a few years ago from a cracked line that left me stranded dont want a repeat.
I have a filter on the suction side which is causing me issues I just want to can the thing and put a coarse mesh and water drain on that side.

Napa 3395 seems to work well for me. Wix 33395

Iirc the napa is 8 microns and the wix is 16 or 23 micron

I used a FM100 setup on my 12V

They rate burst pressure on those at a crazy 300psi..
I can probably run a lower micron rating (and water absorbing media) as well. Im guessing that if I had restriction on the pressure side it wouldnt damage anything since the pump is driven by return spring force, not the cam lobe.