Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Competition and Performance
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Dodge Competition and Performance General Dodge Competition and Performance Discussion

Closed Thread
 
Thread Tools
Old 05-12-2009, 05:38 AM   #1
Lance

Name: Lance
Title: Loner
Status: Not Here
Join Date: Nov 2007
Location: Albuquerque
Member`s Gallery
Posts: 293
WH1C/ HE351 hybrid

im working on putting a he351 compressor wheel onto my WH1C . I bought the he351 cover too hoping that it would fit, but the V-band flange is much smaller than the HX backing plate. so can't do that. What I am going to try is to machine the backing plate a little bigger so the wheel fits in it. Also going to carve out the HX35 cover so the bigger wheel fits inside. It looks like the 351 wheel is longer than the HX35 wheel so im going to shave a little off the front and back side. pics to follow.
 
Old 05-12-2009, 06:04 PM   #2
Lance

Name: Lance
Title: Loner
Status: Not Here
Join Date: Nov 2007
Location: Albuquerque
Member`s Gallery
Posts: 293
Click the image to open in full size.
HX35 depth

Click the image to open in full size.
351 Depth

Click the image to open in full size.
351 on the left, pic shows it is taller from the base of the wheel to the OD

Click the image to open in full size.
351 on the left, pic shows it is taller at the tip
 
Old 05-12-2009, 06:08 PM   #3
Lance

Name: Lance
Title: Loner
Status: Not Here
Join Date: Nov 2007
Location: Albuquerque
Member`s Gallery
Posts: 293
Click the image to open in full size.
351 cover held against HX35 backing plate. way too small to use.

Click the image to open in full size.
351 on the left

Click the image to open in full size.

Click the image to open in full size.
as you can see the V-band clamp section diameter is way different
 
Old 05-12-2009, 06:10 PM   #4
Lance

Name: Lance
Title: Loner
Status: Not Here
Join Date: Nov 2007
Location: Albuquerque
Member`s Gallery
Posts: 293
Click the image to open in full size.
351 on the left

Click the image to open in full size.
351 on the left, obviously larger inducer

Click the image to open in full size.
351 on the left, larger exducer
 
Old 05-12-2009, 07:15 PM   #5
Scooter's Roofing

Name: Scooter's Roofing
Title: Too Much Time
Status: Not Here
Join Date: Oct 2006
Member`s Gallery
Posts: 17,007
why not just run an HE351?
__________________
that's pretty much all of it
 
Old 05-12-2009, 07:18 PM   #6
Trapper
 
Trapper's Avatar

Name: Trapper
Title: Hater
Status: Not Here
Join Date: Aug 2006
Location: Arizona
Member`s Gallery
Posts: 2,878
Lance is the shaft size the same?
__________________
Work In Progress
 
Old 05-12-2009, 07:19 PM   #7
Scooter's Roofing

Name: Scooter's Roofing
Title: Too Much Time
Status: Not Here
Join Date: Oct 2006
Member`s Gallery
Posts: 17,007
meanwhile, it looks like you've got a WH1C and an HE351VGT compresor housing on your hands...

every HX35 I've seen and the HE351's on the 5.9's have snap-ring compressor cover retention
__________________
that's pretty much all of it
 
Old 05-12-2009, 07:24 PM   #8
loganp
 
loganp's Avatar

Name: loganp
Title: hot rod farmboy
Status: Not Here
Join Date: Sep 2008
Location: OR
Member`s Gallery
Posts: 506
Those look exactly like mine do. HX35w and HE351cw.
__________________
2004 Dodge QCLB, '97 12 valve Cummins swap, NV5600, 4x4
BHAF, 4" exhaust, pump mods, Southbend 3600

1999.5 VW Jetta TDI, 5 speed
Panzer skid plate, Profi Diesel 2.5" exhaust

1994 Dodge SCLB, 12 valve Cummins, auto, 4x4
BHAF, 3" straight pipe, pump mods
 
Old 05-12-2009, 07:33 PM   #9
Scooter's Roofing

Name: Scooter's Roofing
Title: Too Much Time
Status: Not Here
Join Date: Oct 2006
Member`s Gallery
Posts: 17,007
did the 95's have HX35's? I know the 94's had WH1C's

every HX35 I've seen had a snap-ring compressor housing...

does your HE351 have the integral silencer ring section like his does? sure looks like a 6.7 comp housing to me.

the HE351VGT I've got here looks just like that. v-band compressor and all... the HE351cw that came off my '06 is a snap-ring
__________________
that's pretty much all of it
 
Old 05-12-2009, 07:35 PM   #10
Scooter's Roofing

Name: Scooter's Roofing
Title: Too Much Time
Status: Not Here
Join Date: Oct 2006
Member`s Gallery
Posts: 17,007
Click the image to open in full size.
__________________
that's pretty much all of it
 
Old 05-12-2009, 07:37 PM   #11
sdubfid

Name: sdubfid
Title: Green Behind the Ears
Status: Not Here
Join Date: Sep 2008
Location: Vancouver, BC
Member`s Gallery
Posts: 91
Forrest is right. The he351cw has a snap-ring and also casting for the wastegate to mount to.

H1C will have v band compressor mounting.
 
Old 05-12-2009, 08:36 PM   #12
Lance

Name: Lance
Title: Loner
Status: Not Here
Join Date: Nov 2007
Location: Albuquerque
Member`s Gallery
Posts: 293
the new compressor housing and wheel came from an 08 ram with the 6.7l. the shaft diameter is the same, and my stock turbo definately says HX35 on the cover. from what I understand it will be the same as a 35/40 hybrid, but the blade technology is newer?
 
Old 05-12-2009, 09:06 PM   #13
Trapper
 
Trapper's Avatar

Name: Trapper
Title: Hater
Status: Not Here
Join Date: Aug 2006
Location: Arizona
Member`s Gallery
Posts: 2,878
If your going to swap wheels I would take the HX35 Compressor housing to get machined to fit the 351 wheel. But what wrong with the 351? Why not mount that on?
__________________
Work In Progress
 
Old 05-12-2009, 09:09 PM   #14
sdubfid

Name: sdubfid
Title: Green Behind the Ears
Status: Not Here
Join Date: Sep 2008
Location: Vancouver, BC
Member`s Gallery
Posts: 91
I would put the he351ve on there with the vanes controlled with a wastegate actuator.

Don't even bother making a he351/hx35 hybrid. Thats taking 2 steps backwards if you already have an 08 6.7 turbo to play with.
 
Old 05-12-2009, 09:10 PM   #15
Trapper
 
Trapper's Avatar

Name: Trapper
Title: Hater
Status: Not Here
Join Date: Aug 2006
Location: Arizona
Member`s Gallery
Posts: 2,878
Quote:
Originally Posted by sdubfid View Post
I would put the he351ve on there with the vanes controlled with a wastegate actuator.

Don't even bother making a he351/hx35 hybrid. Thats taking 2 steps backwards if you already have an 08 6.7 turbo to play with.
I agree.
__________________
Work In Progress
 
Old 05-12-2009, 11:58 PM   #16
Big Blue24
 
Big Blue24's Avatar

Name: Big Blue24
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Jan 2008
Location: Cedar City, UT
Member`s Gallery
Posts: 6,310
Quote:
Originally Posted by Lance View Post
im working on putting a he351 compressor wheel onto my HX35. I bought the he351 cover too hoping that it would fit, but the V-band flange is much smaller than the HX backing plate. so can't do that. What I am going to try is to machine the backing plate a little bigger so the wheel fits in it. Also going to carve out the HX35 cover so the bigger wheel fits inside. It looks like the 351 wheel is longer than the HX35 wheel so im going to shave a little off the front and back side. pics to follow.

Lets clean up this thread a little. I agree that you have a He351ve off a 6.7 aka VGT turbo. Your "HX35" looks like any other H1C that I have seen, where did you find HX35 marked on the turbo?

My 99' HX35 had a snap ring not a v-band for the compressor cover.

My 2005 He351cw had a snap ring not a v-band compressor cover.


To those saying why doesn't he use the 6.7's HE351ve in it's stock configuration, the exhaust housing inlet is a unique size and will not bolt up. The only person I have seen with this turbo welded a plate to a stock manifold so new bolt holes could be drilled and tapped etc. The flange is a hybrid in size between a T-3, T-4, and T-6 but it's close enough to the stock T-3 size that bolts interfere and conflict in such a way that a one piece adapter flange is not feasible. The compressor outlet is different than stock location so it would require new cold piping. The exhaust outlet is different and so the stock 6.7 cast elbow and portion of downpipe would have to be rigged up. And last but not least, he would have to rig up a way to control the variable geometry or fix it at a certain size that ultimately is a compromise between spool-up and top end flow.

The easiest way to make this project work is to buy a HX40 compressor housing from HTT or Gillette Diesel. Since the "HX35" turbo in this project appears to be a H1C, buy a "hybrid compressor cover" that has a v-band flange sized to fit the H1C compressor backing plate.

I suspect a real HX35 and HE351cw=04.5-07 5.9's could be made into a hybrid with simple maching to the HX 35 backing plate to accept the larger diameter exducer on the HE compressor wheel and then a suitable retrofit charge air cold pipe would be required.
__________________
95' 2wd Junker Drag Truck
1502 HP Fuel-Only 12mm P7100 Pump
SXE 472 over GTX55 116mm
OEM 12v Block
 
Old 05-13-2009, 12:04 AM   #17
Big Blue24
 
Big Blue24's Avatar

Name: Big Blue24
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Jan 2008
Location: Cedar City, UT
Member`s Gallery
Posts: 6,310
Great pictures by the way, love to see these experiments. Who knows, maybe you can machine the compressor cover to fit. If you have to machine the cover, might as well machine the stock compressor cover so you don't have to redo the charge air plumbing.

Here's a link to Gillette, they claim some 94's have WH1C-s. http://www.gillettdiesel.com/turboch...pgrades-3.aspx
__________________
95' 2wd Junker Drag Truck
1502 HP Fuel-Only 12mm P7100 Pump
SXE 472 over GTX55 116mm
OEM 12v Block
 
Old 05-13-2009, 02:34 AM   #18
Lance

Name: Lance
Title: Loner
Status: Not Here
Join Date: Nov 2007
Location: Albuquerque
Member`s Gallery
Posts: 293
main reason I am not using the whole turbo is because all I have is the compressor wheel and housing. I don't have the whole thing. also all that other stuff Bigblue said too.

I plan on trying to machine it to fit and I will try to take note of how much material was removed from each part too.

And I just went out and checked, it actually is a WH1C. haha all this time I thought I had an HX35!
 
Old 05-13-2009, 04:56 AM   #19
Scooter's Roofing

Name: Scooter's Roofing
Title: Too Much Time
Status: Not Here
Join Date: Oct 2006
Member`s Gallery
Posts: 17,007
I know you're on the other side of the world, but you could get an HE351 off of a 5.9 and a downpipe flange for under $400 and have them headed your way on a slow boat
__________________
that's pretty much all of it
 
Old 05-13-2009, 06:54 AM   #20
Lance

Name: Lance
Title: Loner
Status: Not Here
Join Date: Nov 2007
Location: Albuquerque
Member`s Gallery
Posts: 293
actually shipping with priority mail is the best way. it only takes about a week to get here usually.

forget about UPS. I checked on the price to ship two 3/4 inch heim joints and just the shipping cost was over $100.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 06:57 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com