My dyno run at indy

This curve dont look too bad, does it? almosy 800 rpms above 400 with the peak at 414.

Nice numbers

Hey Jeff

Plese inform what type of mods you have made to engine .

:ylsuper:

Ok here we go from one end to the other.
Fleetguard BHAF
HTT HX40 16cm2 wastegated at 36
PDR intercooler boots
Haisley intercooler
BD turboguard
100hp EDM injectors
19* timing
4K governer springs and heavy valve springs
stock plate with the slots ground out
A1 12mm head studs
Wire O rings
HTT manafold
4" exhaust to 2 5" stacks
-6 Aeroquip from one end to the other
An extra crispy joe donnley sachs clutch
the most abused NV4500 on the drag strip
3.5 gears
Procomp AT 285/75R16
Perviously I had an air filter come off durring harvest and it sucked in ALOT of soybean dust and it is now a low compression/high blow by engine.

gongrats Wayne..