Need help with my hx40/gt4202

T

Thegrampatrk

New member
Joined
Jan 23, 2011
Messages
232
So my hx 40 is too high and my gt4202 sits too low due to the t4 to t6 adapter but I rly like the bd hot pipe I have and don't want to build a different one when I have one that worksive tried a spacer under my hx40 but then it hits my glass hood
 
So you are running a stock manifold with t3/t4 adapter and a hot pipe with T4/T6 adapter?

How tall are the adapters.
 
No I'm running a super hx40 from pdr t3 foot a bd power 40/s300 hot pipe with t4 foot and a t4 to t6 adapter that's 1in tall
 
Get a t4 1.15 for the 4202 easy fix any performance Garrett dealer will have one.
 
Sorry, I read post #3 wrong, though it said you need a T4 manifold. I agree with the lost guy.
 
Yeah times like this I wish dex was still a phone call away every time I turn around I go to call his cell and I remember he doesn't have it where he's at

Could I use a 1.28 in a t4 or will it be too tight I found a used but good 1.28
 
If you found it for a good price I'd snag it. I have seen people use a Tighter AR before with no issues.
 
You must log in or register to reply here.
Back
Top