Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Competition and Performance
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Dodge Competition and Performance General Dodge Competition and Performance Discussion

Closed Thread
 
Thread Tools
Old 08-17-2018, 05:44 AM   #1
Mightywhitey03

Name: Mightywhitey03
Title: Rookie
Status: Not Here
Join Date: Jun 2018
Member`s Gallery
Posts: 13
turbo choice? 05 common rail, 03/04 pistons, ddp 30% overs. 6spd,

Wrapping up my nee build on the truck and need help:
05 common rail 5.9
Mahle .020" over 03/04 style Pistons
Balanced bottom end
Head studs
Stock cam/springs
DDP injectors with 30% over nozzles
BD 2nd gen manifold
Stock cp3 (looking to leave it that way)
BD lift pump/dual filter setup
Nv5600 with valair dual disc organic clutch.
4.10 gears
Calibrated Addiction (Kentucky) tuning it
I do tow with the truck regular, but usually nothing over 10-12k (GCVWR of roughly 18-20k) most times it's a race car on an open trailer (5-5500lbs)
Looking for a box turbo, no gate, let fuel dictate the boost (all of it) I get recommendations of everything from s362 to s464. And everything from a 65mm turbine exducer to 83mm.
Guys Care to give me some guidance? I understand it's not going to spool as early as stock, but really don't want something ive gotta keep up over 2k to get any wind from.

Thanks in advance.
__________________
'05 QCSB 6spd 4wd. BHAF, banks hi ram, MBRP 5" straight pipe. Reverse leveled, 315 duratracs on stock 17's $hit-ass Diablo predator.

Last edited by Mightywhitey03; 08-17-2018 at 05:50 AM.
 
Old 08-17-2018, 06:25 AM   #2
turbo2387
 
turbo2387's Avatar

Name: turbo2387
Title: Nipple Fluffer
Status: Not Here
Join Date: Jun 2011
Location: Indiana
Member`s Gallery
Posts: 665
177283 63/68/.88 t4 will spool well but not have a huge top end
177284 66/74/.91 t4 will spool slower but have much more top end.

a 66 will surge on a quick throttle lift more than most people like. these are my 2 recommendations for a cheap box turbo that might tow once in awhile. obviously the 63 will tow better and the 66 will make more HP. both need a t4 manifold or an adapter.
 
Old 08-17-2018, 07:10 AM   #3
ramthiscummins

Name: ramthiscummins
Title: Too Much Time
Status: Not Here
Join Date: Sep 2010
Location: Canada EH!
Member`s Gallery
Posts: 589
I would stick with something closer to stock if you are towing. Stay below the 73 wheel in the s300 frame. s400 will be too laggy.
__________________
2003 QCSB cummins, DDP 12mm CP3, DDP SM 150% overs, a turbo, Firepunk diesel 48re
 
Old 08-17-2018, 07:16 AM   #4
Mightywhitey03

Name: Mightywhitey03
Title: Rookie
Status: Not Here
Join Date: Jun 2018
Member`s Gallery
Posts: 13
Quote:
Originally Posted by turbo2387 View Post
177283 63/68/.88 t4 will spool well but not have a huge top end
177284 66/74/.91 t4 will spool slower but have much more top end.

a 66 will surge on a quick throttle lift more than most people like. these are my 2 recommendations for a cheap box turbo that might tow once in awhile. obviously the 63 will tow better and the 66 will make more HP. both need a t4 manifold or an adapter.
Sounds like the 63/68/.88 is what I'll go with. Manifold is t4 so thankfully no adapter gonna be needed.

I'm not sure what "top end power" is considered with a setup like this, but if it'll pull clean to the stock governor, I'd be happy.
__________________
'05 QCSB 6spd 4wd. BHAF, banks hi ram, MBRP 5" straight pipe. Reverse leveled, 315 duratracs on stock 17's $hit-ass Diablo predator.
 
Old 08-17-2018, 07:26 AM   #5
turbo2387
 
turbo2387's Avatar

Name: turbo2387
Title: Nipple Fluffer
Status: Not Here
Join Date: Jun 2011
Location: Indiana
Member`s Gallery
Posts: 665
a gated housing typically comes in 12 or 14cm or .7 and .8 AR. a .88 is tight to not have a gate. you could run into some drive pressure issues if you flog on the truck much.
 
Old 08-17-2018, 08:25 AM   #6
Mightywhitey03

Name: Mightywhitey03
Title: Rookie
Status: Not Here
Join Date: Jun 2018
Member`s Gallery
Posts: 13
Are there .91 housings for the 68mm wheel?
__________________
'05 QCSB 6spd 4wd. BHAF, banks hi ram, MBRP 5" straight pipe. Reverse leveled, 315 duratracs on stock 17's $hit-ass Diablo predator.
 
Old 08-17-2018, 09:09 AM   #7
turbo2387
 
turbo2387's Avatar

Name: turbo2387
Title: Nipple Fluffer
Status: Not Here
Join Date: Jun 2011
Location: Indiana
Member`s Gallery
Posts: 665
not in a box turbo. and im not sure otherwise
 
Old 08-17-2018, 09:53 AM   #8
zfaylor
 
zfaylor's Avatar

Name: zfaylor
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Nov 2010
Location: P-TOWN!, Indiana
Member`s Gallery
Posts: 5,024
Yes there are .91 housings available for the 68mm wheel. I prefer the .83 though.
__________________
2015 half ton heavy chevy
81 Fairmont LS project
Many yard ornament projects...

North American Turbo
 
Old 08-17-2018, 11:29 AM   #9
bracker8040

Name: bracker8040
Title: Too Much Time
Status: Not Here
Join Date: Jan 2007
Member`s Gallery
Posts: 818
I’m with Mr. Taylor. .88 T-4 is open scroll and spoolup will suck. It’d be worse than a .91 twin scroll. I run the twin scroll .83 on virtually all the S300’s I install. Granted, they all go on 6.0 Powerstroke’s, but they turn more rpm than a Cummins a lot of the time and I’ve not seen issues with drive pressure getting to the high side until we get into the 3,600+ rpm range on a setup that is 550-600hp.
 
Old 08-17-2018, 11:13 PM   #10
Mightywhitey03

Name: Mightywhitey03
Title: Rookie
Status: Not Here
Join Date: Jun 2018
Member`s Gallery
Posts: 13
Quote:
Originally Posted by bracker8040 View Post
I’m with Mr. Taylor. .88 T-4 is open scroll and spoolup will suck. It’d be worse than a .91 twin scroll. I run the twin scroll .83 on virtually all the S300’s I install. Granted, they all go on 6.0 Powerstroke’s, but they turn more rpm than a Cummins a lot of the time and I’ve not seen issues with drive pressure getting to the high side until we get into the 3,600+ rpm range on a setup that is 550-600hp.
Ok so just to clarify, a 63/68/.83 (twin scroll) would be fine for what I intend on doing?
__________________
'05 QCSB 6spd 4wd. BHAF, banks hi ram, MBRP 5" straight pipe. Reverse leveled, 315 duratracs on stock 17's $hit-ass Diablo predator.
 
Old 08-18-2018, 12:23 PM   #11
bracker8040

Name: bracker8040
Title: Too Much Time
Status: Not Here
Join Date: Jan 2007
Member`s Gallery
Posts: 818
I think it would be a good choice. I personally would spend a little more to have the SX-E S363/68 with the .83 T-4 on it. You’ll have to have some machine work do on the exhaust downpipe flange and compressor cover outlet, and I’m sure Mr Taylor or Infinite Performance could hook you up. We’re lucky in that regard on a 6.0. Stock downpipe and intercooler pipe hook up with no modifications needed.
 
Old 08-18-2018, 03:25 PM   #12
QMFB
 
QMFB's Avatar

Name: QMFB
Title: Fastest Welder in Texas
Status: Not Here
Join Date: Apr 2016
Location: Corpus Christi, TX.
Member`s Gallery
Posts: 1,061
Why not go with a s300gx ?
57(or 58 billet)65/14 ?
Not real spendy, and would spool nicely on your setup with some towing.
__________________
04 CCLB DRW - 6.4 Cummins, HPTuners, 80% S&S, 10mm S&S CP3, AD165, s464 /s475, full billet 48re, Arp's EVERYWHERE, mild head work, lots of time and money... And never done.
 
Old 08-18-2018, 07:04 PM   #13
Mightywhitey03

Name: Mightywhitey03
Title: Rookie
Status: Not Here
Join Date: Jun 2018
Member`s Gallery
Posts: 13
Quote:
Originally Posted by bracker8040 View Post
I think it would be a good choice. I personally would spend a little more to have the SX-E S363/68 with the .83 T-4 on it. You’ll have to have some machine work do on the exhaust downpipe flange and compressor cover outlet, and I’m sure Mr Taylor or Infinite Performance could hook you up. We’re lucky in that regard on a 6.0. Stock downpipe and intercooler pipe hook up with no modifications needed.
Pardon my ignorance, as I'm really not sure what the difference is on the sx-e line.
I'm a machinist by trade so modifying anything wouldn't be an issue. Just not really sure what needs done
__________________
'05 QCSB 6spd 4wd. BHAF, banks hi ram, MBRP 5" straight pipe. Reverse leveled, 315 duratracs on stock 17's $hit-ass Diablo predator.
 
Old 08-18-2018, 11:56 PM   #14
Backhoe man
 
Backhoe man's Avatar

Name: Backhoe man
Title: nobody
Status: Not Here
Join Date: Apr 2008
Member`s Gallery
Posts: 475
The 62/68 fmw works really nice for what you are describing, if it was me I would be looking at a twin scroll turbine housing if you are set on t4. With good tuning a .91 will spool pretty good and you have a little extra fuel to help it out.
 
Old 08-19-2018, 06:11 AM   #15
Howling
 
Howling's Avatar

Name: Howling
Title: Soot Sniffer
Status: Not Here
Join Date: Apr 2006
Location: Northern,IL
Member`s Gallery
Posts: 4,304
I have a 63/68/83 on my 12v ,wanted a turbo that is responsive and can still tow with .

S363/68 T4.88 Open Turbo

Sent from my SM-G955U using Tapatalk
__________________
Eric

2006 Dodge CTD/48re 4x4 Sport
With some fuel and air.
Bullseye,Hamilton,Exergy,EFI,ATS,FASS,HTS,Thuren, Toyo's...

1996 2500 RC 4x4 CTD-63/68/.83,5X.014,180 maxed Ppump,Fass...
 
Old 08-20-2018, 05:49 PM   #16
mfsuper90
 
mfsuper90's Avatar

Name: mfsuper90
Title: 300ft is all I need
Status: Not Here
Join Date: Feb 2013
Location: Southeast ohio
Member`s Gallery
Posts: 769
I helped a friend put a 63/68/.88 on his 12v a long time ago, and it was way too laggy for a 63mm. The 36x15.5 tires didnt help, but it was enough to convince me to never have a .88 open housing on a truck again.
__________________
’82 300D benz Bosch MW turned up, HX30, W/A Intercooler
MF Super 90 various odds and ends done. Farm stocker
MF 98 3-71 screaming jimmy. Needs N90's. Another farm stock
'14 Ram Anarchy EFI, G56
 
Old 08-20-2018, 07:26 PM   #17
Howling
 
Howling's Avatar

Name: Howling
Title: Soot Sniffer
Status: Not Here
Join Date: Apr 2006
Location: Northern,IL
Member`s Gallery
Posts: 4,304
Quote:
Originally Posted by mfsuper90 View Post
I helped a friend put a 63/68/.88 on his 12v a long time ago, and it was way too laggy for a 63mm. The 36x15.5 tires didnt help, but it was enough to convince me to never have a .88 open housing on a truck again.
I swapped the 88 open for a divided .83 on mine .

Sent from my SM-G955U using Tapatalk
__________________
Eric

2006 Dodge CTD/48re 4x4 Sport
With some fuel and air.
Bullseye,Hamilton,Exergy,EFI,ATS,FASS,HTS,Thuren, Toyo's...

1996 2500 RC 4x4 CTD-63/68/.83,5X.014,180 maxed Ppump,Fass...
 
Old 08-21-2018, 07:35 PM   #18
smokingoat04
 
smokingoat04's Avatar

Name: smokingoat04
Title: Not real sure
Status: Not Here
Join Date: Dec 2007
Location: Missouri
Member`s Gallery
Posts: 948
Any thought to selling 2nd gen manifold, getting a 3rd gen one and trying a modified he351 such as 63.5/67 Taterbuilt, fleece cheetah, or something equivilant. If you wanna stay 2nd gen t-4 I say sxe362/68
__________________
04.4 QCSB Nv5600 under the knife again.....2018 build engaged
2007 classic LBZ 3500 rclb single wheel 5" straight pipe, afe, trans go jr., Efi Live Moonshined
 
Old 08-22-2018, 06:26 AM   #19
Mightywhitey03

Name: Mightywhitey03
Title: Rookie
Status: Not Here
Join Date: Jun 2018
Member`s Gallery
Posts: 13
Quote:
Originally Posted by smokingoat04 View Post
Any thought to selling 2nd gen manifold, getting a 3rd gen one and trying a modified he351 such as 63.5/67 Taterbuilt, fleece cheetah, or something equivilant. If you wanna stay 2nd gen t-4 I say sxe362/68

Really hate to sell off a manifold I just recieved last Thursday lol. Fan boi in me wanted the 2nd gen manifold to help with the sound some. I know... Ridiculous reason for spending money.
62/68/.83 divided?
__________________
'05 QCSB 6spd 4wd. BHAF, banks hi ram, MBRP 5" straight pipe. Reverse leveled, 315 duratracs on stock 17's $hit-ass Diablo predator.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 08:57 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com