filling 12v head - Competition Diesel.Com

smokin24v · 04-16-2015, 06:58 PM

Just bought a filled block, now we need to fill our head... this will be our first time doing something like this and was just wondering if you guys had any tips or advice before we start...

Or is this something we should let a machine shop do?

joefarmer · 04-17-2015, 01:44 PM

Figure out a good way to get the entrained air out of the mix. Concrete vibrator, shaker table, etc.

DISTURBED · 04-17-2015, 02:00 PM

Its takes 30 days to cure

04-16-2015, 06:58 PM	#1
smokin24v Name: smokin24v Title: Too Much Time Status: Not Here Join Date: Apr 2009 Member`s Gallery Posts: 537	filling 12v head Just bought a filled block, now we need to fill our head... this will be our first time doing something like this and was just wondering if you guys had any tips or advice before we start... Or is this something we should let a machine shop do?

04-17-2015, 01:44 PM	#2
joefarmer Name: joefarmer Title: MR. Supreme Overlord Status: Not Here Join Date: Jul 2006 Location: ohio Member`s Gallery Posts: 6,137	Figure out a good way to get the entrained air out of the mix. Concrete vibrator, shaker table, etc. __________________ brandon'); DROP TABLE Users;-- 1948 Dodge 1.5t 12v RH swap \| 99 F250 12v RE test rkt \| 11 X5 'no soup' \| 08 F250 CR RE swap \| 05 2500 CR 68 standalone firepunk.com

04-17-2015, 02:00 PM	#3
DISTURBED Name: DISTURBED Title: YEA WE RIDE THE SHORT BUS Status: Not Here Join Date: Nov 2007 Location: Winchester, Va Member`s Gallery Posts: 6,417	Its takes 30 days to cure __________________ Thanks, Jeremy 01 CTD Retired sled puller, dedicated "Twin Turbo" tow rig 96 CTD "TOO" Disturbed 3.0 - Built by Disturbed Diesel Performance 96 CTD "The Sickness" 2.6/2.8- Built by Disturbed Diesel Performance