Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > Tech Area- Dodge > Dodge Tech > 94-98 2nd Gen. 12V
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 01-16-2018, 10:04 AM   #1
Nascar
 
Nascar's Avatar

Name: Nascar
Title: Green Behind the Ears
Status: Not Here
Join Date: Aug 2006
Member`s Gallery
Posts: 57
Farrell Diesel Pumps

Just a heads up guys. Seth gave us dealers the new pump structure Sunday night. Prices aren’t changing but the core policy is, due to the 24v p7100 conversion guys & others, not supplying cores for builds. The core price will now be added on top of the price if acceptable core is not sent in “before" build date.

That leads to “acceptable cores”

We also need to clarify what constitutes a "complete and usable" core pump. Complete pump means it has all dv holders dv's, fuel plate, afc and afc foot, throttle lever, shutoff lever. Usable pump means there is no damage to the cam nose or threads, no holes in governor housings, and no rust in the fuel galley. Missing parts are as follows: $50 deduction for missing plate, $50 deduction for missing afc foot, $25 deduction for missing throttle lever, $25 deduction for missing shutoff lever, $100 deduction for damaged cam, $150 deduction for rust in the fuel galley.

As always if you are sending in your core :
Let the pump drain all oil for at least a half hour by standing it up on the shaft. Then tip it back down on its side to drain fuel for a while, then back up to drain oil again. This gets almost all the oil out of the pump and saves the box from getting oil soaked.
Next you need to remove all the "accessories and brackets" from the pump. The shop does not need them to calibrate the pump, they usually get broken in shipping, poke holes in the box.

Pieces that should be removed include the following:
Any fuel or oil lines and fittings
The support bracket on the bottom of the pump
Any fitting in the afc for boost reference (these always get damaged in shipping if not removed)
All the throttle bracket and linkage assembly only ....leave the throttle & shut off lever.
Remove the shutoff solenoid and bracket.

Next thing, DO NOT USE ANY FORM OF TAPE TO SEAL FUEL INLET/OUTLET, OIL FITTING, OR DV HOLDERS!!!! It turns into a nasty form of adhesive goo that is a pain to remove from the pump and angry pump guys' hands.

Up next is to bag your pump, heavy trash bags work really well for this (the bag will catch any residual oil from the pump without ruining the box during shipping.
When you package your pump, DO NOT allow a courier to do this, they will use packing peanuts and your pump will get damaged in shipping, it's just that simple. Do not use packing peanuts as packing material, these pumps are heavy and they will not protect it during shipping. The easiest and best packing material is wadded up newspaper. It takes a lot of it, but it will work well and cushions the pumps surprisingly well. Wad the paper up and toss it in the box until the box is full of paper, then drop your pump in. Now wad up at least the same amount of paper and put it in front, behind, on the sides, and over the top of the pump. If you think it's full of paper and packaged well, add some more paper just to be safe, it will compact down nicely when you close your box and tape everything shut.
__________________
98 SLT 12v SB 4X4, G56, Dieseltuff's Stg 5 twins,Cam,700cc p7100, Taper Cut DV's, 90hp inj's. SBC DD, studs, O-ringed, Stg 3 ported head,PacBrake

2009 Touareg TDI
Diesel Performance Parts - Dieseltuff
 
Old 01-18-2018, 05:41 AM   #2
ofelas
 
ofelas's Avatar

Name: ofelas
Title: Too Much Time
Status: Not Here
Join Date: Oct 2015
Member`s Gallery
Posts: 285
Good to know, thanks for the heads up Mark
__________________
Oversized exhaust tips are false advertising, just like the banana shoved down your britches.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 07:18 AM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com