Fuel pressure warning light help - Competition Diesel.Com

Fummins450 · 12-08-2012, 10:03 AM

So I ordered this kit off eBay and the instruction are terrible. I need to know where my brass fittings plug into it says it can go in the fuel filter housing or the injection pump somewhere.. Well I don't have a fuel filter due to having my air dog. So any help should be great guys.

captain_stabbin · 12-11-2012, 05:15 PM

i believe the sensor screws into the airdog

Rob-97-12v · 12-11-2012, 10:10 PM

Put it at the inlet of the pump so it's reading the pressure at the pump

9612vinva · 12-11-2012, 11:05 PM

IMO those things are worthless...

About the same as any idiot light in a new car...

Spend some money and get a set of gauges to tell you the real story...

12valvepwer · 12-13-2012, 01:05 AM

I agree to get a gauge but either way if you look on the top of the a.d. near the end of the pump motor there is an allen plug. If you remove the plug you can screw in the sensor for the light or gauge.

12-08-2012, 10:03 AM	#1
Fummins450 Name: Fummins450 Title: Cummins guru Status: Not Here Join Date: Dec 2012 Location: bowling green ky Member`s Gallery Posts: 22	Fuel pressure warning light help So I ordered this kit off eBay and the instruction are terrible. I need to know where my brass fittings plug into it says it can go in the fuel filter housing or the injection pump somewhere.. Well I don't have a fuel filter due to having my air dog. So any help should be great guys. __________________ 2005 f350 cummins 12v conversion, airdog,0 fuel plate,70 hp stix, 3 inch lift, 35in nittos

12-11-2012, 10:10 PM	#3
Rob-97-12v Name: Rob-97-12v Title: Green Behind the Ears Status: Not Here Join Date: Apr 2012 Location: SW Michigan Member`s Gallery Posts: 39	Put it at the inlet of the pump so it's reading the pressure at the pump __________________ 97 Dodge Ram 2500, Ext. Cab, 4x4, 7x.010 sdx, 62mm hx40, haisley 4k's, ARP head studs, TCI triple disk

12-11-2012, 11:05 PM	#4
9612vinva Name: 9612vinva Title: Da Man Status: Not Here Join Date: Mar 2009 Location: Va beach Member`s Gallery Posts: 158	IMO those things are worthless... About the same as any idiot light in a new car... Spend some money and get a set of gauges to tell you the real story... __________________ '97 2500 ECLB 5 Speed....

12-11-2012, 05:15 PM	#2
captain_stabbin Name: captain_stabbin Title: hmm Status: Not Here Join Date: Feb 2011 Location: tx Member`s Gallery Posts: 267	i believe the sensor screws into the airdog

12-13-2012, 01:05 AM	#5
12valvepwer Name: 12valvepwer Title: Rookie Status: Not Here Join Date: Dec 2012 Member`s Gallery Posts: 18	I agree to get a gauge but either way if you look on the top of the a.d. near the end of the pump motor there is an allen plug. If you remove the plug you can screw in the sensor for the light or gauge.