Billet S400s and S400/500 Parts

Trying to make some room in my storage, and would like to move these things along. All prices are shipped and everything used is in very good condition.

First up is a brand new billet S485/96/1.32 T-6 turbo. Has race cover with v-band discharge and 360* thrust bearing. The comp wheel weighs 50 grams less than a cast 80mm wheel, so it will spool like a S476 and outflow the S480 by a good margin. Have two of these available. $1700.







Next I have some various compressor/turbine housings and compressor wheels. Most fit the S400 series and one for the S500.

Brand new parts include:

3x S475 Standard (.63 A/R) Compressor Covers- $75/Ea
1x S480 Standard (.63 A/R) Compressor Cover- $200
1x S400 .90 T-4 Divided Turbine Housing for the 74/83mm turbine wheel- $150
1x S500 1.45 T-6 Undivided Turbine Housing for the 99/110mm turbine wheel- $225







Used parts include:

1x S480 Standard (.63 A/R) Compressor Cover- $150
1x S464 Standard (.63 A/R) Compressor Cover with Cast Compressor Wheel- $100
1x S400 1.32 T-6 Turbine Housing that's been machined to a 4 5/8" outlet so that you can run a 4" downpipe- $225
1x S400 66mm Billet Compressor Wheel- $125

Great seller, would not hesitate one second to do business with again!

Sent from my SAMSUNG-SM-G920A using Tapatalk

Sarafin said:

Great seller, would not hesitate one second to do business with again!

Sent from my SAMSUNG-SM-G920A using Tapatalk

Click to expand...

Thanks buddy! And the same applies to you as well. How's the S475 working out?

CR From Hell said:

Thanks buddy! And the same applies to you as well. How's the S475 working out?

Click to expand...

Working real good!

Sent from my SAMSUNG-SM-G920A using Tapatalk

Sarafin said:

Working real good!

Sent from my SAMSUNG-SM-G920A using Tapatalk

Click to expand...

LOL

Used 80mm comp cover is gone. Thanks Jim!

All 75mm comp covers sold pending payment.

All S475 comp covers sold, as well as the S464 comp cover and the billet 66mm comp wheel. Updated the original list below, and added some other things (in red) I found in the storage.

Brand new parts include:

1x S480 Standard (.63 A/R) Compressor Cover- $200

1x S400 .90 T-4 Divided Turbine Housing for the 74/83mm turbine wheel- $150

1x S500 1.45 T-6 Undivided Turbine Housing for the 99/110mm turbine wheel- $225

1x S475 Race Cover- $250

1x S480 Bare Center Section. Fits the smaller 74/83mm and 81/87mm turbine wheels. P/N on tag reads 179179- $75

Used parts include:

1x S400 1.32 T-6 Turbine Housing that's been machined to a 4 5/8" outlet so that you can run a 4" downpipe- $225

1x S475 Bare Center Section. Fits the 88/96mm turbine wheel. P/N on tag reads 177288- $50

1x S400 1.0 T-4 Divided Turbine Housing for the 81/87mm turbine wheel. Used for maybe 10 miles, still has original P/N (178788) in paint on housing- $100

1x S400 1.25 T-4 Divided Turbine Housing for the 81/87 turbine wheel. Low usage as well- $80

1x S400 1.10 T-6 Divided Turbine Housing for the 74/83mm turbine wheel- $20

1x S400 1.32 T-6 Divided Turbine Housing for the 88/96mm turbine wheel- $75

2x S400 Cast 80mm Compressor Wheels- $20/Ea

2x S400 Cast 75mm Compressor Wheels- $15/Ea

1x S400 Cast 64mm Compressor Wheel- $10

More parts have left the building. Following items are sold and the list below has been updated to reflect this. One billet S485, S475 race cover, S480 center section, 1.0 and 1.25 T-4 turbine housings, and the 1.32 T-6 turbine housing. Let me know if you guys need anything, thanks!

Billet S485/96/1.32 T-6 turbo. Has race cover with v-band discharge and 360* thrust bearing. The comp wheel weighs 50 grams less than a cast 80mm wheel, so it will spool like a S476 and outflow the S480 by a good margin. Has one pass on it, zero play, in perfect condition. $1550.









Brand new parts include:

1x S480 Standard (.63 A/R) Compressor Cover- $200

1x S400 .90 T-4 Divided Turbine Housing for the 74/83mm turbine wheel- $150

1x S500 1.45 T-6 Undivided Turbine Housing for the 99/110mm turbine wheel- $225

Used parts include:

1x S400 1.32 T-6 Turbine Housing that's been machined to a 4 5/8" outlet so that you can run a 4" downpipe- $225

1x S475 Bare Center Section. Fits the 88/96mm turbine wheel. P/N on tag reads 177288- $50

1x S400 1.10 T-6 Divided Turbine Housing for the 74/83mm turbine wheel- $20

2x S400 Cast 80mm Compressor Wheels- $20/Ea

2x S400 Cast 75mm Compressor Wheels- $15/Ea

1x S400 Cast 64mm Compressor Wheel- $10

Still have the 85 with one pass on it?

Sorry for the delay in response guys. All the parts on the list above are sold. I do have quite a bit of S400 rebuild parts if anyone would be interested in those. PM me for my number and I'll text pics. Thanks!