Advertisement
If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.

Home Who's Online Today's Posts HP Calculator CompD Gift Shop Mark Forums Read
Go Back   Competition Diesel.Com - Bringing The BEST Together > The Starting Line > Competition Vehicle Build Tech > Extreme Engine Tech
Register Members List Timeslips EFI Live Library Invite Your Friends FAQ Calendar Mark Forums Read

Closed Thread
 
Thread Tools
Old 08-18-2018, 02:23 AM   #1
ctdthrasher

Name: ctdthrasher
Title: Green Behind the Ears
Status: Not Here
Join Date: Feb 2015
Member`s Gallery
Posts: 77
Exclamation Couple questions on 6.7 bottom end assembly

Can anyone tell me which way a Mahle piston goes in a 6.7? One side of the underside has one hole and the other two. I’m guessing that the one hole goes over the cooling nozzle and the side with two are the drain?
Also does the long side of a Carrillo rod go to the oil cooler side or cam side? Oem says numbers are on the long side and long side to cooler but Carrillo’s have numbers only on the short side.

Thanks guys C3A414A4-3815-4FB6-BBB3-34C623AF8360.jpg

6B42980A-A6C1-4F12-B3B6-A0BE2C30FFF2.jpg
__________________
98 12V quad cab. PDD 5x14s and 025. 63/68/.83
13.06@103. need more fuel....and air....and fuel
 
Old 08-18-2018, 07:16 AM   #2
biggy238
 
biggy238's Avatar

Name: biggy238
Title: Too Much Time
Status: Not Here
Join Date: Aug 2008
Location: Just North of Wrong
Member`s Gallery
Posts: 10,820
The notch in the skirt goes over the piston oiler.

Sent from my XT1575 using Tapatalk
__________________
Check out @bdmaximusworx

05.5 Campanella White TDi Jetta 5spd 45.5MPG
-Little Sexy
'10 Silver F250 CCLB 4X4 6.4L cummins Swapped
Insta @trash.panda250
 
Old 08-18-2018, 08:25 AM   #3
JWhite
 
JWhite's Avatar

Name: JWhite
Title: Trained monkey
Status: Not Here
Join Date: Aug 2009
Location: F Burg Ohio
Member`s Gallery
Posts: 1,817
While I've witnessed rods that were installed backwards, and they will still run like this, the correct way is long side towards the cooler like you said.
__________________
GMC with a LiLLY
 
Old 08-18-2018, 05:01 PM   #4
QMFB
 
QMFB's Avatar

Name: QMFB
Title: Fastest Welder in Texas
Status: Not Here
Join Date: Apr 2016
Location: Corpus Christi, TX.
Member`s Gallery
Posts: 1,061
Long side towards exhaust manifold. This reduces sheer force in the caps/bolts.
__________________
04 CCLB DRW - 6.4 Cummins, HPTuners, 80% S&S, 10mm S&S CP3, AD165, s464 /s475, full billet 48re, Arp's EVERYWHERE, mild head work, lots of time and money... And never done.
 
Old 09-11-2018, 02:13 PM   #5
Broaner
 
Broaner's Avatar

Name: Broaner
Title: Been There n Broke That
Status: Not Here
Join Date: Apr 2012
Location: Madison, WI
Member`s Gallery
Posts: 744
Many aftermarket rods won't clear the cam when installed backwards.
__________________
05.5 QCSB Shotpeened NV5600 - 994hp/1650tq, 6.7, Wagler Rods, QSB Pistons, 625's, Oversized Valves, ZZFab, P&P, 150%, Dual CP3, 69/73/1.0 & 82/96/1.32
Street Triple, 35's, Trutrac, Carli, MM3 from Gordon, 1100hp
 
Old 09-11-2018, 07:52 PM   #6
Cflanery88
 
Cflanery88's Avatar

Name: Cflanery88
Title: Too Much Time
Status: Not Here
Join Date: Feb 2016
Location: Shelby, MI 49455
Member`s Gallery
Posts: 536
Quote:
Originally Posted by Broaner View Post
Many aftermarket rods won't clear the cam when installed backwards.
My Wagler Rods did not clear the cam. They definitely went in one way.
__________________
06 Dodge Ram 2500 6.4L, Wagler +.080 rods, Hobbit tuned, Exergy150% injectors,Polished s475/87 1:0 A/R Engineered Turbo Billet Wheel,arp625s,14mm main studs,PPE dual fuelers,Hamilton 188/220,extreme pushrods,Fleece bypass/drains/distribution block,110#springs.
 
Closed Thread

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 12:42 PM.

 


Powered by vBulletin
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2006 - 2024, CompetitionDiesel.com
all information found on this site is property of www.competitiondiesel.com