68 rfe pan

So I bought a new15 and wanted to change my mag Tex pan over from my 12 When I went to do it the 15 has tranny lines in the way so it wouldn’t fit. Anybody run into this Also the pan from the 15 would not fit on the 12. It hits the bottom of the sump filter

Can you bend the lines out of the way. I was going to buy the pan for my 13 and didn't think there would be an issue.

Are they both 4x4 trucks? Some of the 2wd trucks use a different filter.

So I found that Napa has a couple different filters must be 4x4 and 2x4 like you said so I switched filter in the 12 and got a stock pan from summit to work. I still have not messed with lines on the 15 yet to see if I can bend them. Both were 4x4