TS Performance MPD

wideopen

Slum Lord
Well I finally got it…and I love it.. My TS Performance MPD Monitor & Heads Up Display.. This thing is awesome. No more straining to see my Edge Attitude display, with the adjustable brightness and large easy to read display this has defiantly taken over as my primary gauges.

stuff79.jpg




Installation of the MPD took less than 20 minutes; it would have taken longer if I would have had to tap my Exhaust manifold for a Pyrometer, but mine was already tapped. Setup was simple; I had the unit set up and ready to go in 20 seconds.

With the MPD you are able to set values for the Boost, EGT’s, RPM, and Fuel ,if you go over these values the Heads up display with flash at you to let you know you have gone over these user set values, this makes the heads up display a must have for a drag racer/Puller who wanted to keep from trashing there truck.

Another thing that the MPD does that is neat is it Stores minimum and maximums of each feature .That the user is able to reset on the fly. So that user is able to keep track of what your diesel did during a ¼ mile race or a pull.
So my final summery is that this unit is a Homerun for TS Performance and a must have for the racers/pullers.
 
I'm headed down to TS Performance in two weeks to have the following mods added to my 2003 Dmax.

MP-8
MPD Monitor & Heads Up Display.
MBRP SS 4" Exhaust, no cat with 6" dual wall tip.
AFE Pro Guard 7 Intake System Stage II.

Stacked with my current Hypertech.

I'm gonna take my camera down to document the install process.

Next projects on the list.
Larger fuel tank.
Wheels/Tires
Brakes
 
Well I'm back home after a 600 mile trip and 5 hours with the fine folks at TS Performance. All I can say is WOW!!!! I'm hooked. Stay tuned for install pics and a complete write up. A day with TS Performance.
 
Is there no write up on this? Sorry for bringin up an old thread, but we just got the MP-8 in for the 6.7L Cummins, and have no idea which wires to hook into.. The instructions BLOW

any help?
 
Is there no write up on this? Sorry for bringin up an old thread, but we just got the MP-8 in for the 6.7L Cummins, and have no idea which wires to hook into.. The instructions BLOW

any help?

Call the shop and have them fax you or email you some. Most people don't have any problems with the monitor install but we have techs that can help you.

Dennis
 
Back
Top