how much timing with W/M? - Competition Diesel.Com

1stgenjake · 12-10-2010, 11:17 PM

How much timing can i run using -20 washer fluid for water meth? i have a M & H timing spacer and DevilsOwn meth coming in a few days...will the combo be too much with a 3/16th bump(about 17* i believe)?

SMOKIN93 · 12-10-2010, 11:44 PM

17* should be alright, I wouldn't go much higher then like 20 or 22 with w/m

1stgenjake · 12-11-2010, 12:00 AM

ok ill have to find out how far the timing spacer moves it...its a mod to the KSB which advances timinf as RPMs go up

12-10-2010, 11:17 PM	#1
1stgenjake Name: 1stgenjake Title: Green Behind the Ears Status: Not Here Join Date: Mar 2010 Location: Ohio Member`s Gallery Posts: 75	how much timing with W/M? How much timing can i run using -20 washer fluid for water meth? i have a M & H timing spacer and DevilsOwn meth coming in a few days...will the combo be too much with a 3/16th bump(about 17* i believe)? __________________ '93 w250- SDX 5x16s, gauges, pump maxed w/pin/spring/spacer/bumped, Amsoil cold air, DTech S362, Valair ceramic clutch, piston lift pump 20psi, ARP studs, 24v intake, PS IC, 3" CP's, 3pc manifold, W/M, traction bars

12-10-2010, 11:44 PM	#2
SMOKIN93 Name: SMOKIN93 Title: Too Much Time Status: Not Here Join Date: Aug 2007 Location: Folsom, CA Member`s Gallery Posts: 1,145	17* should be alright, I wouldn't go much higher then like 20 or 22 with w/m __________________ Fast: 1993 regular cab long bed 4x4, 215 pump, S400, injectors by Weston, Specrite torque converter. 9.64 139 Slow: 1992 Extended cab 4x4, p-pump, Specrite converter

12-11-2010, 12:00 AM	#3
1stgenjake Name: 1stgenjake Title: Green Behind the Ears Status: Not Here Join Date: Mar 2010 Location: Ohio Member`s Gallery Posts: 75	ok ill have to find out how far the timing spacer moves it...its a mod to the KSB which advances timinf as RPMs go up __________________ '93 w250- SDX 5x16s, gauges, pump maxed w/pin/spring/spacer/bumped, Amsoil cold air, DTech S362, Valair ceramic clutch, piston lift pump 20psi, ARP studs, 24v intake, PS IC, 3" CP's, 3pc manifold, W/M, traction bars