Fleece XDL Data Logger - Competition Diesel.Com

bcdeutsch731 · 06-06-2017, 03:49 PM

The Fleece Performance XDL was designed to be an expansion data logger that seamlessly integrates with EFILive via the V2 module. With the unmatched ability to log all 21 XDL channels and 96 OBDII channels and display them using EFILive’s superior user interface, the XDL is the most versatile and cost effective data logger on the market. The XDL is not limited to OBD II type or EFILive supported vehicles though.

I used this in my race truck for a couple seasons. Over the winter I sent logger back to Fleece so they could make sure everything works like it should. Fleece supplied me with a new wiring harness because the old one burnt up in the fire. Everything else checked out good.

This will come with everything in the pictures. GPS for ground speed. Six pressure sensors. One temp sensor. More temp sensors can be ordered from Fleece or Amazon for like $50.
Asking $1500

bcdeutsch731 · 06-06-2017, 03:55 PM

Here are the pics

*Chris Tobin* · 06-06-2017, 07:52 PM

Quote:

Originally Posted by bcdeutsch731

Fleece supplied me with a new wiring harness because the old one burnt up in the fire.

What fire Brett???

bcdeutsch731 · 06-08-2017, 07:34 AM

I can't believe you didn't hear that my truck caught fire in October at a local race. Just before I got to the finish line my motor went up in flames. The flames got the firewall so hot it started my carpet and all the wiring under the dash on fire.
I tore the whole truck apart and I'm starting over for the most part. The truck is at HSP getting the new 25.6 cage and some other goodies. Hoping to have it back out sometime in September.

*Chris Tobin* · 06-08-2017, 09:02 AM

Quote:

Originally Posted by bcdeutsch731

I can't believe you didn't hear that my truck caught fire in October at a local race. Just before I got to the finish line my motor went up in flames. The flames got the firewall so hot it started my carpet and all the wiring under the dash on fire.
I tore the whole truck apart and I'm starting over for the most part. The truck is at HSP getting the new 25.6 cage and some other goodies. Hoping to have it back out sometime in September.

Wow!!! No I hadn't heard, but I don't do facebook or stuff like that...

Glad you are okay and that the damage wasn't too severe!!! I look forward to seeing the next revision!!! HSP does awesome work for sure!!!

bcdeutsch731 · 06-14-2017, 06:56 AM

Bump $1450 shipped

bcdeutsch731 · 06-19-2017, 01:24 PM

bump $1400 shipped

Pudge · 06-20-2017, 12:13 AM

Because I'm a bit technology stupid, will this work on something with no ecm, like a mechanical truck? That is as long as you have a V2 to hook into the XDL, you can use it on anything else? Free bump for a whole lot of data

Sent from my SM-G930R4 using Tapatalk

bcdeutsch731 · 06-20-2017, 10:25 AM

It should work as long as you have a V2. You would only be able to record the 21 XDL channels and nothing on the obd side.

The best person to ask would be Jeff at Fleece. Here is his email.
jeff@fleeceperformance.com

bcdeutsch731 · 06-29-2017, 07:02 AM

bump $1350 shipped

Ryan Tucker · 07-01-2017, 09:33 PM

What bell are you running on the 400? Big 13 inch lockup?

bcdeutsch731 · 07-01-2017, 10:52 PM

Quote:

Originally Posted by Ryan Tucker

What bell are you running on the 400? Big 13 inch lockup?

Browell big bell with an extra 1" added to the depth of it to fit the 12" Neal Chance lock up

Ryan Tucker · 07-02-2017, 05:30 PM

Quote:

Originally Posted by bcdeutsch731

Browell big bell with an extra 1" added to the depth of it to fit the 12" Neal Chance lock up

Great setup, and thanks. Good luck to you getting her back together, hated to hear about the fire

Ryan

bcdeutsch731 · 07-13-2017, 05:12 AM

need gone! $1250 shipped

bcdeutsch731 · 08-02-2017, 09:40 AM

bump $1200 shipped

06-06-2017, 03:49 PM	#1
bcdeutsch731 Name: bcdeutsch731 Title: Diesel Enthusiast Status: Not Here Join Date: Jul 2011 Member`s Gallery Posts: 222	Fleece XDL Data Logger The Fleece Performance XDL was designed to be an expansion data logger that seamlessly integrates with EFILive via the V2 module. With the unmatched ability to log all 21 XDL channels and 96 OBDII channels and display them using EFILive’s superior user interface, the XDL is the most versatile and cost effective data logger on the market. The XDL is not limited to OBD II type or EFILive supported vehicles though. I used this in my race truck for a couple seasons. Over the winter I sent logger back to Fleece so they could make sure everything works like it should. Fleece supplied me with a new wiring harness because the old one burnt up in the fire. Everything else checked out good. This will come with everything in the pictures. GPS for ground speed. Six pressure sensors. One temp sensor. More temp sensors can be ordered from Fleece or Amazon for like $50. Asking $1500 __________________ 1969 Chevy C10 Danville LLY/ TH400, 8.3@168mph http://www.facebook.com/pages/Deutsc...83455581802944

06-14-2017, 06:56 AM	#6
bcdeutsch731 Name: bcdeutsch731 Title: Diesel Enthusiast Status: Not Here Join Date: Jul 2011 Member`s Gallery Posts: 222	Bump $1450 shipped __________________ 1969 Chevy C10 Danville LLY/ TH400, 8.3@168mph http://www.facebook.com/pages/Deutsc...83455581802944

06-19-2017, 01:24 PM	#7
bcdeutsch731 Name: bcdeutsch731 Title: Diesel Enthusiast Status: Not Here Join Date: Jul 2011 Member`s Gallery Posts: 222	bump $1400 shipped __________________ 1969 Chevy C10 Danville LLY/ TH400, 8.3@168mph http://www.facebook.com/pages/Deutsc...83455581802944

06-20-2017, 12:13 AM	#8
Pudge Name: Pudge Title: Too Much Time Status: Not Here Join Date: Aug 2007 Location: Va. Member`s Gallery Posts: 421	Because I'm a bit technology stupid, will this work on something with no ecm, like a mechanical truck? That is as long as you have a V2 to hook into the XDL, you can use it on anything else? Free bump for a whole lot of data Sent from my SM-G930R4 using Tapatalk __________________ Wishing for more time and money.

06-20-2017, 10:25 AM	#9
bcdeutsch731 Name: bcdeutsch731 Title: Diesel Enthusiast Status: Not Here Join Date: Jul 2011 Member`s Gallery Posts: 222	It should work as long as you have a V2. You would only be able to record the 21 XDL channels and nothing on the obd side. The best person to ask would be Jeff at Fleece. Here is his email. jeff@fleeceperformance.com __________________ 1969 Chevy C10 Danville LLY/ TH400, 8.3@168mph http://www.facebook.com/pages/Deutsc...83455581802944

06-29-2017, 07:02 AM	#10
bcdeutsch731 Name: bcdeutsch731 Title: Diesel Enthusiast Status: Not Here Join Date: Jul 2011 Member`s Gallery Posts: 222	bump $1350 shipped __________________ 1969 Chevy C10 Danville LLY/ TH400, 8.3@168mph http://www.facebook.com/pages/Deutsc...83455581802944

07-01-2017, 09:33 PM	#11
Ryan Tucker Name: Ryan Tucker Title: Do it Dont talk about it. Status: Not Here Join Date: Aug 2014 Member`s Gallery Posts: 390	What bell are you running on the 400? Big 13 inch lockup?

07-13-2017, 05:12 AM	#14
bcdeutsch731 Name: bcdeutsch731 Title: Diesel Enthusiast Status: Not Here Join Date: Jul 2011 Member`s Gallery Posts: 222	need gone! $1250 shipped __________________ 1969 Chevy C10 Danville LLY/ TH400, 8.3@168mph http://www.facebook.com/pages/Deutsc...83455581802944

08-02-2017, 09:40 AM	#15
bcdeutsch731 Name: bcdeutsch731 Title: Diesel Enthusiast Status: Not Here Join Date: Jul 2011 Member`s Gallery Posts: 222	bump $1200 shipped __________________ 1969 Chevy C10 Danville LLY/ TH400, 8.3@168mph http://www.facebook.com/pages/Deutsc...83455581802944