Advertisement |
|
|
|
If this is your first visit, be sure to check out the FAQ by clicking the link above.
You may have to register before you can post: click the register link above to proceed.
To start viewing messages, select the forum that you want to visit from the selection below.
|
Dodge Competition and Performance General Dodge Competition and Performance Discussion |
01-17-2016, 09:29 PM
|
#1
|
Name: bd blk 12v
Title: Fixen broken bulldogs
Status: Not Here
Join Date: Sep 2008
Member`s Gallery
Posts: 241
|
47re lockup od problem
Hello guys i been fighting this transmission for a bit. I installed a lockup an overdrive switch for my 96 4x4. The switches work great to lock and overdrive. The problem is when you shut the switches off. It stays locked. If you put the truck in neutral going down the road shut the engine off it will unlock and you can do it all over again. The trans has less than 300miles on it. Its rebuilt new electronics in It tfod shift kit dpc single converter. It shifts fine but won't unlock what am I missing? I've tried 3 different switches with no change.
__________________
94 4x4 5 speed ceramic valiar clutch 66-71-12 5x.016s set at 290bar 191 dvs 4k gsk hd valve springs head ported and oringed by hamilton 5 inch straight pipe 23* timing kdp tabbed
White 96 eclb 4x4 auto 345k bone stock
|
|
|
01-18-2016, 08:10 AM
|
#2
|
Name: stubz616
Title: Too Much Time
Status: Not Here
Join Date: Oct 2008
Location: Brewster, MA
Member`s Gallery
Posts: 1,327
|
Won't unlock even hitting the brake? Or just going to neutral then back to drive?
Sent from my iPhone using Tapatalk
__________________
95 RCLB Farrell Diesel Stage 5 13mm pump,Hamilton Springs,Retainers,Pushrods,Fluidampr,Steed Speed,S467.7/soon to be S488 atmo,Full Billet Trans,DPC 4 disk TC,BD Pressure Loc,Haley Speed 5x.022s,Diesel Pros Custom Cam,O-Ringed,.010 over HG,A1000,Hellman sump,625 Studs, 30*
|
|
|
01-18-2016, 05:58 PM
|
#3
|
Name: bd blk 12v
Title: Fixen broken bulldogs
Status: Not Here
Join Date: Sep 2008
Member`s Gallery
Posts: 241
|
No it will only unlock when the key is shut off. If you shut it off in neutral start it back up it works.
__________________
94 4x4 5 speed ceramic valiar clutch 66-71-12 5x.016s set at 290bar 191 dvs 4k gsk hd valve springs head ported and oringed by hamilton 5 inch straight pipe 23* timing kdp tabbed
White 96 eclb 4x4 auto 345k bone stock
|
|
|
01-18-2016, 11:53 PM
|
#4
|
Name: Big Blue24
Title: Comp Diesel Sponsor
Status: Not Here
Join Date: Jan 2008
Location: Cedar City, UT
Member`s Gallery
Posts: 6,310
|
Try cutting the wire for lock-up down at the transmission connector and then only hook up your lock-up switch wire to the remaining short section of wire leading to the transmission connector plug, that way only your lock-up switch has control of the lock-up solenoid and see if it will lock and unlock normally when you flip the switch. The ground signal(trigger wire) for lock-up is the orange/black wire that connects to the #7 pin on the round 8 pin transmission connector plug.
__________________
95' 2wd Junker Drag Truck
1502 HP Fuel-Only 12mm P7100 Pump
SXE 472 over GTX55 116mm
OEM 12v Block
|
|
|
01-20-2016, 09:17 AM
|
#5
|
Name: bd blk 12v
Title: Fixen broken bulldogs
Status: Not Here
Join Date: Sep 2008
Member`s Gallery
Posts: 241
|
We tried that bigblue24. It does the same thing and then throws the transmission in limp mode stays in second gear. I have no clue what is going on with it.
__________________
94 4x4 5 speed ceramic valiar clutch 66-71-12 5x.016s set at 290bar 191 dvs 4k gsk hd valve springs head ported and oringed by hamilton 5 inch straight pipe 23* timing kdp tabbed
White 96 eclb 4x4 auto 345k bone stock
|
|
|
01-20-2016, 08:43 PM
|
#6
|
Name: biggy238
Title: Too Much Time
Status: Not Here
Join Date: Aug 2008
Location: Just North of Wrong
Member`s Gallery
Posts: 10,862
|
The PCM has to be flashed with a file from a gas burner.
Every time you lock it, it will limp and then operated like the OSS failed. I had mine flashed in 06.
Search around for it.
Mine was a late 95 built 96 model if that helps.
__________________
Check out @bdmaximusworx
05.5 Campanella White TDi Jetta 5spd 45.5MPG
-Little Sexy
'10 Silver F250 CCLB 4X4 6.4L cummins Swapped
Insta @trash.panda250
Last edited by biggy238; 01-20-2016 at 08:45 PM.
|
|
|
01-21-2016, 03:14 AM
|
#7
|
Name: madmikeismad
Title: So mad
Status: Not Here
Join Date: Dec 2009
Location: Newalla, OK
Member`s Gallery
Posts: 14,347
|
How does it stay locked if you cut the harness wire and kill the tcc ground with a switch? You have something else wrong.
Sent from my HTC0P3P7 using Tapatalk
__________________
Mike Hill
|
|
|
01-21-2016, 06:01 AM
|
#8
|
Name: biggy238
Title: Too Much Time
Status: Not Here
Join Date: Aug 2008
Location: Just North of Wrong
Member`s Gallery
Posts: 10,862
|
Quote:
Originally Posted by madmikeismad
How does it stay locked if you cut the harness wire and kill the tcc ground with a switch? You have something else wrong.
Sent from my HTC0P3P7 using Tapatalk
|
I was a bit hasty. I wonder how long it has had a switch vs how long it's had a problem.
__________________
Check out @bdmaximusworx
05.5 Campanella White TDi Jetta 5spd 45.5MPG
-Little Sexy
'10 Silver F250 CCLB 4X4 6.4L cummins Swapped
Insta @trash.panda250
|
|
|
01-21-2016, 08:10 AM
|
#9
|
Name: bd blk 12v
Title: Fixen broken bulldogs
Status: Not Here
Join Date: Sep 2008
Member`s Gallery
Posts: 241
|
I have owned the truck 3 years it never had overdrive. I got tired of that I started checking and bought a snap on mt2500 and it would connect to the truck. I drove the truck checking pressure and the mt2500 showed 4th gear and the gauge would go up to 4psi then 0 no overdrive. I assumed the od seal was blown. My brother had a core and a guy I work with rebuilds transmissions. I bought a rebuild kit a dpc single converter tfod kit a band anchor and HD strut. Put the trans no od still. Now mt2500 wont connect. I thought let me try a switch setup I will control it. It worked shifted od and lockup. The first time in 3 years it felt good. I went to shut it off and it stayed locked killed the engine. I was like wth. My brother and I have been just fed up with chasing the same thing. Its odd you would think you controlling it, it cant go wrong but it does. We have tried 3 different switches. If u put it in neutral running down the road shut the engine off. Fire the engine up and its ready to do it all over again. I also bought new electronics for the trans when it was built. I'm at a loss. I was thinkin pcm I have one from a 97 but don't know what that will do. The truck is a 12-95 build truck. Thanks for the help.
__________________
94 4x4 5 speed ceramic valiar clutch 66-71-12 5x.016s set at 290bar 191 dvs 4k gsk hd valve springs head ported and oringed by hamilton 5 inch straight pipe 23* timing kdp tabbed
White 96 eclb 4x4 auto 345k bone stock
|
|
|
01-21-2016, 09:23 AM
|
#10
|
Name: rockjeep73
Title: Too Much Time
Status: Not Here
Join Date: Jul 2007
Location: California
Member`s Gallery
Posts: 1,339
|
Does it have a relay for the trans? (Not sure if a 96 does) if it does remove the relay and install a jumper wire and try it like that.
__________________
SHSDiesel.com
|
|
|
01-21-2016, 09:43 AM
|
#11
|
Name: bd blk 12v
Title: Fixen broken bulldogs
Status: Not Here
Join Date: Sep 2008
Member`s Gallery
Posts: 241
|
That's been done relay is pulled jumper is installed.
__________________
94 4x4 5 speed ceramic valiar clutch 66-71-12 5x.016s set at 290bar 191 dvs 4k gsk hd valve springs head ported and oringed by hamilton 5 inch straight pipe 23* timing kdp tabbed
White 96 eclb 4x4 auto 345k bone stock
|
|
|
01-21-2016, 03:58 PM
|
#12
|
Name: madmikeismad
Title: So mad
Status: Not Here
Join Date: Dec 2009
Location: Newalla, OK
Member`s Gallery
Posts: 14,347
|
Quote:
Originally Posted by bd blk 12v
That's been done relay is pulled jumper is installed.
|
You could try with out the jumper as well? I was able to leave my relay in with no issues. Different trucks react differently, no idea why.
__________________
Mike Hill
|
|
|
06-27-2017, 03:58 PM
|
#13
|
Name: Synergygreen12v
Title: Rookie
Status: Not Here
Join Date: Apr 2017
Member`s Gallery
Posts: 23
|
Did you ever find a solution to this problem? I have the same issue in my truck
Sent from my SM-G900V using Tapatalk
|
|
|
06-27-2017, 06:41 PM
|
#14
|
Name: biggy238
Title: Too Much Time
Status: Not Here
Join Date: Aug 2008
Location: Just North of Wrong
Member`s Gallery
Posts: 10,862
|
Is it a 96?
Sent from my XT1575 using Tapatalk
__________________
Check out @bdmaximusworx
05.5 Campanella White TDi Jetta 5spd 45.5MPG
-Little Sexy
'10 Silver F250 CCLB 4X4 6.4L cummins Swapped
Insta @trash.panda250
|
|
|
06-28-2017, 08:55 AM
|
#15
|
Name: Synergygreen12v
Title: Rookie
Status: Not Here
Join Date: Apr 2017
Member`s Gallery
Posts: 23
|
No mine is a 98 with a 97 trans and pcm
Sent from my SM-G900V using Tapatalk
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
All times are GMT -5. The time now is 07:17 AM.
|